If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Enter programming mode
1.Connect your motor and receiver to the speed controller,but do not link the battery
2.Turn on your transmitter and move the throttle lever to the full throttle position(full)
3.As shown,connect your battery and the controller will initialize with a musical tone
Phrase II programming
After three seconds,the controller will begin a sequence of tones followed by one or more beeps.Each sequence identifies a parameter that can be programmed and is repeated three times
Specification:
60A
Continuous current:60A
Burst current:70A
BEC model:Switch
BEC output:5V/3A
Recommended battery:Li-ion/Lipoly 2-4S;Ni-MH/Ni-Cd 6-18NIMH
Cooling: water cooling
80A
Continuous current:80A
Burst current:95A
BEC model:switch
BEC output:5V/5A
Recommended battery:Li-ion/Lipoly 2-7S;Ni-MH/Ni-Cd 6-20NIMH
Cooling:water cooling
100A
Continuous current:100A
Burst current:120A
BEC model:switch
BEC output:5V/5A
Recommended battery:Li-ion/Lipoly 2-7S;Ni-MH/Ni-Cd 6-20NIMH
Cooling:water cooling
125A
Continuous current:125A
Burst current:150A
BEC model:switch
BEC output:5V/5A
Recommended battery:Li-ion/Lipoly 2-7S;Ni-MH/Ni-Cd 6-20NIMH
Cooling:water cooling
200A
Continuous current:200A
Burst current:220A
BEC model:switch
BEC output:5V/5A
Recommended battery:Li-ion/Lipoly 2-7S;Ni-MH/Ni-Cd 6-20NIMH
Cooling:water cooling
Package includes:
1*water-cooled ESC(style optional)