USB and Din MIDI Controller with 3 Faders and expression pedal input

 2m USB cable and angled stand.

Box dimensions are 116mm x 78 mm x 40mm to 55mm. The fader travel is 60mm.

When a fader or pedal is moved the display shows the output CC value.

The CC number, MIDI Channel and RANGE of the faders and pedal can be changed by using the display and small button located on the back of the box.

There are 5 presets each store the 3 fader cc numbers and range, totalling 15 fader presets (3x5)

These Setting are stored and remembered when powered off.

Each Fader and pedal can also be set to a different channel allowing control of multiple devices

The controller can use both USB and DIN MIDI at the same time allowing you to control DAW software with a fader and a hardware device with another.

The USB Cable is also needed to power the unit when only using the DIN socket and needs to be plugged into a USB port or plug socket (phone charger plug).

The expression pedal socket is 6.5mm and is TRS (tip-ring-sleeve) and will work with standard pedals if your pedal has other functions you will need to turn these off

Can be used to control Ableton Live and other DAW software that allows MIDI learn/mapping, and also any device that uses MIDI CCs (please refer to the manual of your device for the CC numbers).

__________________________________________

Quick video demo (copy and paste the link).

 www.youtube.com/watch?v=QSzSl2oq380

Controlling software (Renoise) and altering range with Arturia Microfreak

(copy andpaste the link).

www.youtube.com/channel/UCgWSqQln0fNKMmSzE0zLqbA

 Korg Volca Keys and Midi setup

https://youtu.be/HbXW_5Xn4EQ

_________________________________________

HOW TO SET THE CC NUMBER

To set the CC# for a fader press and hold the button located on the top of the box, then move the fader to the number of the CC you want it to control.  Let go of the button and the display will show 'CC-' then flash the new CC number.

Tip: If you find it difficult to stop on the exact number, for example you are trying to stop on 10 but it only changes between 9 and 11 go to 30+then back down and you should be able to stop on 10.

DISPLAY THE CC NUMBER A FADER IS SET TO AND THE PRESET NUMBER

Press the small button TWO times and keep the button held in on the 2nd press and the display will show “dSp” (display) Now move a fader and the display will show the current set cc number
Then release the button to show the preset number

CHANGE ALL FADER CHANNEL NUMBERS (1-16)
The channel is changed the same way the cc# is changed but you press the small button THREE times and keeping the button held in on the 3rd press and the display will show “CHA” (channel all) now move any knob/fader to the number of the channel you want all the faders to be set to
Then let go of the small button and the display will show “c” and the new channel number

CHANGING THE PRESET (1-5)
Press the small button FOUR times and keep the button held in on the 4th press and the display will show “PrE” (preset) Now move the fader to the preset number you want it set to
Then let go of the small button and the display will show “PrE” then the preset number

CHANGE THE LOW RANGE OF A FADER (0-127)
Press the small button FIVE times and keep the button held in on the 5th press and the display will show “LO” (low)
Now move the knob/fader you want to change the low range of and move it to the number you want it set to
Then let go of the small button and the display will show “LO” and flash the low range of that knob/fader

CHANGE THE HIGH RANGE OF A FADER (0 -127)
Press the small button SIX times and keep the button held in on the 6th press and the display will show “HI” (high)
Now move the knob/fader you want to change the high range of and move it to the number you want it set to
Then let go of the small button and the display will show “HI” and flash the high range of that knob/fader

CHANGE ONE FADER CHANNEL (channel numbers 1-16)
changing just one fader channel is done the same way as all the channels but you press the small button seven times and keep the button held in on the 7th time  and the display will show “CHI” (channel Independent) now move the fader to the number of the channel you want the fader to be set to

Then let go of the small button and the display will show “c” and the new channel