eBay

Feature:

1. Small in size and light in weight, easy to carry and assemble, 8 directions and easy to operate.
2. It is made of polycarbonate housing, which has high mechanical strength, high hardness, corrosion resistance and rust resistance.
3. Anti‑exposure, high impact strength, long service life, suitable long‑term use in outdoor environments.
4. With the internal smooth bearing system, the accuracy of information collection is effectively ensured and the use is more convenient.
5. High‑performance bearings, low rotational resistance, accurate measurement, anti‑electromagnetic interference treatment, can be applied to both four‑wire and three‑wire connection.

Specification:

Condition: 100% Brand New
Item Type: Wind Direction Sensor
Material: Polycarbonate
Wide Voltage: 10-30V DC Power Input
Application: Widely used in the measurement of wind direction in greenhouses, environmental protection, weather stations, ships, wharf, breeding and other environments.

Parameter:
DC Power Supply (Default)	10-30V DC
Maximum Power Consumption	Voltage Output	1.2W
Transmitter Circuit Operating Temperature	-20℃ to +60℃, 0%RH-80%RH
Dynamic Response Time	≤0.5s
Output Signal	Voltage Output	0-5V
Load Capacity	Voltage Output	Output Resistance ≤600Ω
Calculation Method:
0-5V Output Comparison Table
Output Value (V)	Corresponding Wind Direction
≈0	North Wind
≈0.7143	Northeast Wind
≈1.4286	Wind
≈2.1429	Southeast Wind
≈2.8571	South Wind
≈3.5714	Southwest Wind
≈4.2857	West Wind
≈5	Northwest Wind

Product Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 in
Weight: Approx. 315g / 11.1oz

Common Problems and Solutions:
No output or output error possible causes:
1) The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range.
2) The wiring method is incorrect or the wiring sequence is wrong.
3) The power supply voltage is incorrect (24V power supply for 0-10V type).
4) The distance between the transmitter and the collector is too long, causing signal disturbance.
5) The PLC collection port is damaged.
6) Equipment damage.

Package List:

1 x Wind Direction Sensor

1 x Cable

1 x Screw Kit (4 x Screw, 4 x Nut)

Note:

1. The user should not disassemble it by himself, and should not touch the sensor core to avoid damage to the product.

2. Keep away from high-power interference equipment as much as possible to avoid inaccurate measurement, such as inverters, motors, etc. When installing or disassembling the transmitter, the power must be disconnected firstly, and water in the transmitter can cause irreversible changes.

3. Prevent chemical agents, oil, dust, etc. from directly invading the sensor, do not use it for a long time under condensation and extreme temperature environment, and prevent cold and heat shock.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg