Features:
* Use microprocessing and high-end MCU chips for intelligent control.
* PIC microcontroller, strongest anti-interference.
* With over charge protection, over discharge protection, electronic short circuit protection, overload protection, battery reverse connection protection, solar panel reverse connection protection, etc.
* With discharge rate correction control, different discharge rates have different termination voltage, in line with the inherent characteristics of the battery.
* Scientific battery management mode, when the overdischarge, the battery to raise the voltage charge, a compensation maintenance. In normal use, the combination of balanced charging and floating charging is used to lift the charging once a week to prevent the battery vulcanization and greatly extend the service life of the battery.
* Parameter Settings have power failure saving function, that is, important data such as mode and control parameters are saved in the chip, and are not lost after power failure, making adjustment more convenient and more stable.
* The charging circuit adopts double MOSFET series control circuit, so that the circuit voltage loss is reduced by nearly half compared with the circuit using diode, and the charging is controlled by PWM mode, which greatly improves the charging efficiency and greatly increases the power consumption time.
* Intuitive LED indicates the current status of the battery, so that users understand the use.
* Three operating modes can be selected: normally open mode, pure light control mode and light control plus timing mode.
* Overload and short circuit protection :≥3 times the rated current short circuit protection ac tion, 1.5 times the rated current delay 5 minutes off, 5 minutes after the automatic recovery.
Specifications:
Model :10A
Solar panel power :≤33.3W
Rated charging current :10A
Rated discharge current :10A
voltage :11.1V
No-load current: ≤3A(measured under nominal value)
Charge loop voltage drop: 0.7V±1%
Discharge loop voltage drop: 0.1V±1%
Overvoltage protection: 13.5
Overvoltage recovery: 13.0
Charge cut-off: 12.6
Overshoot protection: 9.0
Overplay recovery :11.1
Charge return :11.1
100 days identification voltage :7
Night recognition voltage :3
Protection class :IP30
Operating temperature :-20℃-55℃
Size :53.4rm*68.6mm*22mm
Package Content:
1 x Solar charging controller
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.