Complete Kit for Automation

for Doors with Counterweights


Intensive use

QUICK ASSEMBLY SYSTEM

Professional

+ OBSTACLE DETECTOR

+ OPTICAL ENCODER

Mod. UNIKO 100kg

From the top of technology

UNIKO is an electromechanical ceiling actuator with a modern design,

for spring or sectional doors.

Available in two models:

For residential use (UNIKO 70).

For condominium use (UNIKO 100).

A high technological value is concentrated in this product which gives the product numerous qualities:

Compact dimensions (360 x 200 x 120 mm).

Installation times reduced by 40%.

Base in sturdy plastic material which reduces the weight of the operator and makes it more manageable.

Prepared for the use of low consumption lamps.

UNIKO 70KG UNIKO 100KG

MOTOR POWER SUPPLY 24 Vdc24 Vdc

MAX THRUST 700 N 1000 N

MAX CAPACITY DIMENSION 10 MQ14 MQ

ENGINE RPM 200 RPM 200 RPM ENCODER

AVERAGE ABSORPTION 0.7 TO 1.2 A

PINION1/2 X1/8 Z9 PITCH 8 Z121/2 X1/8 Z9 PITCH 8 Z12

NOISE LEVEL < 30 DBA < 30 DBA

OPERATING TEMPERATURE -20/55°C -20/55°C

PROTECTION DEGREE IP30IP30

PATENTED THREE-STEP ASSEMBLY:

UNIKO can be assembled in three steps on the appropriate track without the use of tools.

1-Mount the support plate on the track by screwing the two bolts and fixing the lower part.

2-Take the operator, engage the shaft and rotate.

3-Insert the plug.

To disassemble it, all you need is a screwdriver to pop the plug out.

CLICK ON THE LINK FOR THE PDF MANUAL:

MANUFACTURER'S MECHANICAL PART MANUAL

MANUFACTURER'S ELECTRONICS MANUAL

SWINGING ARM MANUAL

KIT COMPOSITION:

n° 1 24V low voltage gearmotor kit, max capacity 100kg, built-in limit switch.

n° 1 control unit positioned in the engine crankcase, with motor force adjustment trimmer and ENCODER, 

slowdown in opening and closing, 4 Operating logic: step-by-step, 

semi-automatic 1 and 2, condominium automatic. Courtesy light, 

Protections against overvoltages, input for photocells, safety edges and backup battery.

n° 1 Single-channel radio receiver incorporated in the control unit (433.9 MHz)
 
n° 1 Antenna incorporated into the control unit, range 30 meters (433.9 MHz)
 
n° 1 4-channel ROLLING CODE remote control

n° 1 treated aluminum sliding guide with 3m chain

n° 1 Swinging arm for counterweight doors

n° 1 Internal emergency release

n° 1 Courtesy light

n° 1 Set of screws and brackets for mounting

n° 1 Assembly instructions for the mechanical and electronic parts in ITALIAN

24 month warranty





A high technological value is concentrated in this product which gives the product numerous qualities: Base in sturdy plastic material which reduces the weight of the operator and makes it more manageable. UNIKO can be assembled in three steps on the appropriate track without the use of tools. 1-Mount the support plate on the track by screwing the two bolts and fixing the lower part. n° 1 24V low voltage gearmotor kit, max capacity 100kg, built-in limit switch. n° 1 control unit positioned in the engine crankcase, with motor force adjustment trimmer and ENCODER,  Protections against overvoltages, input for photocells, safety edges and backup battery. n° 1 Single-channel radio receiver incorporated in the control unit (433.9 MHz) n° 1 Assembly instructions for the mechanical and electronic