Loctite 680 Green - High Strength Retaining Compound - 50ml
Exp 10/2025 - Free Shipping
A high strength, high viscosity room temperature curing adhesive used to join fitted cylindrical parts.
Fixtures in 10 minutes and provides a shear strength of 4,000 psi.
Capable of filling diametral gaps up to 0.015 in. (0.38 mm).
Allows relaxed machining tolerances, and replaces clamp rings, set screws, and snap rings.
Gives best resistance to dynamic, axial and radial loads.
Recommended for retaining shafts, gears, pulleys and similar cylindrical parts.
NSF/ANSI 61 Certified.
ABS Approved.
Agency Approvals / Specifications | NSF/ANSI 61, ABS, CFIA Listed |
Applications | For Slip Fitted Parts |
Color | Green |
Cure Type | Anaerobic Cure |
Diametrical Clearance (Maximum) (in.) | 0.015 |
Fixture Time | 10 min. |
Full Cure Temperature (°C) | 25 |
Full Cure Temperature (°F) | 77 |
Full Cure Time | 24 hr. |
Gap Fill (in.) | 0.015 |
Key Characteristics | Strength: High Strength |
Shear Strength, Steel (psi) |
4000 |
Specific Gravity (g/l @ 25°C) | 1.1 |
Temperature Range (°C) | -54 to 149 |
Temperature Range (°F) | -65 to 300 |
Viscosity (Brookfield mPa.s (cP)) | 4000 |
Viscosity Temperature (°C) | 25 |
Viscosity Temperature (°F) | 77 |
*This is an anaerobic adhesive. Product is filled roughly half-full to leave air space in the bottle and provide
product stability