Description
The electric medical plaster cutter is suitable for removing all types of plaster bandages and is particularly suitable for all types of polymer bandages. It uses a miniature special motor with low noise and vibration, which brings a good experience to the patient. It also has a skin protection function and will not cause injury to the injured person.
Key Features
Customer Service: We aim to provide quality products and
services. If you have any problems, please feel free to contact us. We will reply and
solve theproblem for you as soon as possible.
Specification
Material: Alloy, Rubber, Aluminum Alloy
Color: Green
Case Color: Blue
Power Supply: Corded Electric
Input Power: 110V 50Hz
Rated Input Power: 125W
Oscillation Frequency: ≧12500 times/min
Oscillation Amplitude: 5 degrees
Noise: ≤84dB
Motor Winding Insulation Grade: E Grade
Number of Gears: 6
Gross Weight: 3.5kg/7.71lbs
Net Weight: 2.8kg/6.17lbs
Package Size: 39*24*13cm/15.35*9.44*5.11in
Case Size: 37*11*22cm/14.57*4.33*8.66in
Package Included
1*Electric Medical Plaster Cutter
1*Allen Key
1*Fan-shaped Saw Blade
1*Small Circular Saw Blade
1*Big Circular Saw Blade
1*Aluminum Alloy Case
1*English Manual
Details
Application
The electric medical plaster cutter is suitable for removing all types of plaster bandages. It is suitable for use in hospitals, clinics, etc.
Notes
1. Before use, check whether the saw blade is flat, missing teeth, and properly installed. When installing the saw blade, fix the saw blade shaft, embed the flat square status on the shaft with a wrench, remove the nut in front of the saw blade with another wrench, exit the concave sleeve and the saw blade, and replace it with another saw blade and then screw it tightly. Check the ventilation channel of the motor, should be kept clear to prevent foreign objects from blockage, resulting in poor ventilation, resulting in high-temperature rise when the motor is working, and even burning the motor.
2. When using, do not use too much pressure, and should be pressurized when the saw blade produces a swing. Saw blade in the plaster bandage suddenly stuck, should cut off the power slowly out, rather than the power switch on and off, easy to make the motor damage.
3, The use of the motor shell temperature increases with time, such as if the shell temperature is found to be too hot should be suspended, and wait a while to cool down before use, otherwise, it is easy to cause the motor overheating and burning.
4. When there is an abnormal sound, excessive vibration, and other conditions in use, should be promptly overhauled.
5. After the operation should be wiped clean the plaster saw, usually the plaster saw should be placed in a dry place (relative humidity is not more than 80%, free of the corrosive gas environment) to prevent damage and water in the fall.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.