• 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
• 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect.
• 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
• 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
• 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.

Sovol SH01 Filament Dryer Box

• The damp 3D printing filaments lead to tension, clogging, poor adhesion and shifting of layers. The Sovol 3D SH01 filament dryer box keeps the filament dry and restores the performance of the FDM filaments.
• For 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm
• Suitable for different material filaments such as PLA/PETG/TPU/PVE/ABS/PC/Wood

Main Features

• Larger size for 2 rolls filament
• Unique dry mode without power
• Real-time data display of temperature & humidity
• Support printing without drying
• Built-in fan makes heating more evenly
• Excellent seal performance

• Please put the filament rolls inside in this way to make the filament goes out more smoothly.
• Please open the PTFE plugs on the top of the box during heating for Moisture evaporation.

Two PTFE Outlets

• There are two outlets made with PTFE material, which makes the filament be loaded more smooth from the filament dryer to the extruder.
• When you use the filament dryer for storing filament, you can close these two outlets, when you use it for drying, you can open it for letting the moisture flow out to the air.

Built in Fan

• Evenly distributed heating ports.
• Enough space for 2 rolls filament.
• Built-in fan makes heating more evenly.