The Item for sale:
All item is 3D Printed in ELEGOO Matte Black PLA
More details are below on which option you are selecting.
A _ Filter Holder-QTY (1): Top/Bottom Pieces Housing Slot Filter Holders for 2" Deep Sky Filters (M48x.75)
-QTY (1): Spacer With Hole Thread For 1.25-Inches Filter (M28.5x.75).
B _ DEW 5.5 Inches-QTY (1): Dew 5.5 Inches (140mm) *Requires A_Filter Holder to be able to Attach*.
C _ DEW Extension 5 Inches-QTY(1): Dew Extension 5 Inches (127mm). Need To Shim With Electric Tape For Tight Fitment. *Requires A_Filter Holder and B_Dew 5.5 or 2.75 Inches To Be Able To Attach*.
D _ Bahtinov, Cap Cover and Spike Diffraction-QTY (1): Batinov Mask (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Spike Diffraction 4 veins (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Spike Diffraction 6 veins (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Len Cap Cover directly fit on the S50 and fit in the off position.
E _ SpacerW/HoleThread-QTY (1): Spacer With Hole Thread For 1.25-Inches Filter (M28.5x.75). *Requires A_Filter Holder to be able to Attach*.
F _ Bahtinov & Cap Cover
-QTY (1): Batinov Mask (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Len Cap Cover directly fits on the S50 and fits in the off position.
G _ Spike Diffraction
-QTY (1): Spike Diffraction 4 veins (inner diameter fits on the light block (Dew), and the outer diameter fits directly to S50).
-QTY (1): Spike Diffraction 6 veins (inner diameter fits on the light block (Dew), and the outer diameter fits directly to S50).
H _ Combo w/Dew 5.5in
-QTY (1): Top/bottom pieces housing Slot Filter Holders for 2" Deep Sky Filters (M48x.75)
-QTY (1): Spacer with hole and thread for 1.25-inch Filter (M28.5x.75).
-QTY (1): Light Block Dew 5.5 Inches (140mm)
-QTY (1): Batinov Mask (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Spike Diffraction 4 veins (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Spike Diffraction 6 veins (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Len Cap Cover directly fit on the S50 and fit in the off position.
I _ Combo Complete Set
-QTY (1): Top/bottom pieces housing Slot Filter Holders for 2" Deep Sky Filters (M48x.75)
-QTY (1): Spacer with hole and thread for 1.25-inch Filter (M28.5x.75).
-QTY (1): Light Block Dew 5.5 Inches (140mm)
-QTY (1): Dew Extension 5 Inches (127mm). Need To Shim With Electric Tape For Tight Fitment.
-QTY (1): Batinov Mask (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Spike Diffraction 4 veins (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Spike Diffraction 6 veins (inner diameter fit on the light block (Dew), and the outer diameter fit directly to S50).
-QTY (1): Len Cap Cover directly fit on the S50 and fit in the off position.
Remember that you are screwing into 3D print plastic, so please Counter Clockwise for the thread to line up, then thread in Clockwise, and not to over-tighten.
SeeStar S50Telescope, Len Filter, Stand, tape measures, and paper clip NOT included.
Item will ship in 1 to 2 business days.
Disclaimer:
***NOTE*** Due to the 3D print nature of this product, your results may vary. Sorry, no returns or exchanges. I am NOT responsible for any damages to your EAA telescope due to the result of the use of this product ***NOTE***