Stock #: 591C
One (1)
Aftermarket remote keyless entry fob alarm
Transmitter control clicker keyfob controller replacement
Functions at 100% Tested & Guaranteed
Python / Clifford/ DEI/ Directed Electronics / Avital / Viper / Automate / Auto-Mate
|
1-button remote control slim One-button remote offers DEI's exclusive Super Code Hopping protection against code grabbers, with 2/66 (18 quintillion) rolling codes. With green led. FCC ID: EZSDE1471H Interchangeable FCC IDs:
Interchangeable part #s: Part #: 7111P / 7111L / 7111A / 7111P / 7111R / 4115L / 4115V / 1-Way Remote (7111V)
Frequency: 433 - 434 MHz LED color: Green 1 button Battery: (1) CR 2032
|
|
Compatible with the following systems: AVITAL 4111 AVITAL 4113 AVITAL 4115 Avital 4113 Automate AM6.2 Viper 4115 Python 411 Python 413 Automate 4101A Automate 4113A
|
|
Programming Instructions: 1) Turn the ignition to the ON position. 2) Within 10 seconds, press & release the program switch the number of times corresponding to the desired channel listed next. Once you have selected the channel, press the switch once more and hold it. The LED will flash to confirm the selected channel. Do not release the program switch. 3) Channels: - Channel 1: Auto Learn Standard Configuration (default) - Channel 2: Delete remotes: This feature erases all remotes from the memory of the security system. This is useful in cases when a customer’s remote is lost or stolen. Note: This does not reset the programmed features of the security system or reset the Virtual Tach setting. - Channel 3: Reset Features: This resets features all of the security system to the factory default settings. Note: This feature does not delete the remotes from the security system or reset the Virtual Tach setting. - Channel 4: Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on the next remote start sequence the unit begins virtual tach initialization. Note: The “Zap” feature on the Bitwriter does not reset the Virtual tach setting. 4) While Holding the Program switch, press the button on the transmitter that you would like to control the selected receiver channel. 5) Once the code is learned, the Program switch can be released. You can advance from programming one channel to another by releasing the Program switch and tapping it to advance steps and then holding it. For instance: You have programmed Channel One and you want to program Channel Two. Release the Program switch. Press it one time and release it to advance from Channel One to Channel Two. Now, press and hold the Program switch. The LED will flash two times. As before, do not release it. If you want to program Channel Three after programming Channel One, release the Program switch, press it twice and release it to advance to Channel Three. Then press it once more and hold it. The LED will flash three times to confirm it is ready to receive the code from the transmitter. 6) Exiting programming mode: - Ignition is turned off. - Program switch is pressed too many times. - More than 25 seconds elapses between programming steps. |
Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days.
PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.
Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).
100% Guarantee Remote Shipping / Return Policy
Warranty/Returns:
1. We have a 30 day return policy.
2. All returns for replacements and refund need an RMA #.
3. Please contact us before returning items so we can give you the RMA # and the proper return address.
4. No refunds / replacements will be granted without an RMA#
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The above information can change
which remote you need
for your installed remote keyless system.
.
.
.
.
.
.
Powered by
The free listing tool. List your items fast and easy and manage your active items.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.