Level up Your Camping Setup with the Frontier Outbacker Stove Flue Flashing Kit
DESCRIPTION

Instructions:

(1) Open the chimney hole of the tent: 1. Determine the position of the chimney mouth on the tent, 2. Mark the position of the screw hole on the chimney mouth according to the circular steel sheet and open the hole.

(2) According to the circular steel sheet of the silicone sleeve, cut two wear-resistant materials with the same shape as the steel sheet (thick fabric can also be used instead)

This step can also be omitted, but the addition of wear-resistant materials can better protect the tent from wear and tear

(3) Put the cut wear-resistant material and steel sheet on the inside of the tent opening, and insert the screws from the inside out to the screw holes.

(4) Put wear-resistant materials, silicone sleeves, and steel sheets in-sequence on the outside, and tighten the screws with nuts to fix them.

(5) Cut off the tent fabric inside the silicone ring to complete the opening

(6) After installation, insert it into the chimney and use it. When the diameter of the chimney is greater than 4.5cm, you can cut the silicone ring by yourself!


Specification:


Name: Tent Chimney Anti-scalding Silicone Cover


Weight: 340g


Silicone tolerance is about 280 degrees


Suitable for chimney: 4.5-10cm (more than 4.5cm, you need to cut the rubber ring by yourself)


Include:


1*Anti-scalding silicone cover for tent chimney


notes:




1. Due to various factors such as monitor brightness, light brightness, etc., the actual color of the product may be slightly different from the picture displayed on the website.


2. Please allow for slight manual measurement deviations in the data.


POLICES

 

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 


Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.


DataCaciques