Zooz 800 Series Z-Wave Long Range USB Stick ZST39 LR

SPECIFICATIONS Z-Wave Frequency: 908.42 MHz (US, CA, MX) Power: 4.75-5.25 VDC SDK: 7.18 Wireless Range: Up to 1 mile in open space with Long Range enabled Operating Temperature: 14-104° F Installation and Use: Indoor only Dimensions: 2" x 0.8" x 0.3" FEATURES All NEW 800 Series Z-Wave Long Range radio USB stick: incredible signal, super secure, and fast network! Long Range available for US only Updated command class library: build your Z-Wave software with confidence and support of all of the latest features Supports S2 security and SmartStart Long Range ready: as long as your home automation software and Z-Wave accessories support the new Long Range technology, you can make the most of your smart home with unbeatable reliability of direct hub-to-device communication (Z-Wave LR is available in US/MX/CA frequency only) 800 Series Z-Wave Chip: get more signal coverage and improved performance even without the Long Range capability thanks to the latest generation Z-Wave chip What you'll need: a dedicated computer and home automation software with mobile interface to build a Z-Wave hub using the ZST39 hardware (not included) Up to a mile of range in open space for Long Range enabled devices INSTALLATION Connect the 800 Series Z-Wave Long Range Stick to a USB port on your PC, laptop, or SBC. Use it with your choice of home automation software, including Home Assistant with JS Z-Wave integration, Indigo, and HomeSeer. Follow the instructions for your software provider as the set-up may be different depending on the interface and operating system. Note this product is designed for expert users only and requires at least basic knowledge of programming. Home automation software is required to control and configure your Z-Wave network. Z-Wave product compatibility will depend on the software you choose so we recommend installing an open and proven smart home system with your 800 Series Z-Wave Long Range Stick for best results. NOTE Do NOT perform NVM backup from 500 series or 700 series Z-Wave sticks for this device, this feature is currently not supported and will brick the product . Please read this article before attempting a firmware update on your Z-Wave stick. If you purchased your Z-Wave stick on or after June 2023, it's already on the latest version so do not attempt an update. Z-Wave JS and Z-Wave JS UI do not support the following features available on most 800 series controllers: Long Range NVM Backup/Restore Expert users only: please note that this product comes with basic hardware support and does not include any tech support for the home automation software or host hardware you decide to pair it with

Zooz 800 Series Z-Wave Long Range USB Stick ZST39 LR

SPECIFICATIONS

Z-Wave Frequency: 908.42 MHz (US, CA, MX)
Power: 4.75-5.25 VDC
SDK: 7.18
Wireless Range: Up to 1 mile in open space with Long Range enabled
Operating Temperature: 14-104° F
Installation and Use: Indoor only
Dimensions: 2" x 0.8" x 0.3"

FEATURES

All NEW 800 Series Z-Wave Long Range radio USB stick: incredible signal, super secure, and fast network! Long Range available for US only
Updated command class library: build your Z-Wave software with confidence and support of all of the latest features
Supports S2 security and SmartStart
Long Range ready: as long as your home automation software and Z-Wave accessories support the new Long Range technology, you can make the most of your smart home with unbeatable reliability of direct hub-to-device communication (Z-Wave LR is available in US/MX/CA frequency only)
800 Series Z-Wave Chip: get more signal coverage and improved performance even without the Long Range capability thanks to the latest generation Z-Wave chip
What you'll need: a dedicated computer and home automation software with mobile interface to build a Z-Wave hub using the ZST39 hardware (not included)
Up to a mile of range in open space for Long Range enabled devices

INSTALLATION

Connect the 800 Series Z-Wave Long Range Stick to a USB port on your PC, laptop, or SBC. Use it with your choice of home automation software, including Home Assistant with JS Z-Wave integration, Indigo, and HomeSeer. Follow the instructions for your software provider as the set-up may be different depending on the interface and operating system. Note this product is designed for expert users only and requires at least basic knowledge of programming.

Home automation software is required to control and configure your Z-Wave network. Z-Wave product compatibility will depend on the software you choose so we recommend installing an open and proven smart home system with your 800 Series Z-Wave Long Range Stick for best results.

NOTE

Do NOT perform NVM backup from 500 series or 700 series Z-Wave sticks for this device, this feature is currently not supported and will brick the product . Please read this article before attempting a firmware update on your Z-Wave stick. If you purchased your Z-Wave stick on or after June 2023, it's already on the latest version so do not attempt an update.
Z-Wave JS and Z-Wave JS UI do not support the following features available on most 800 series controllers:
- Long Range
- NVM Backup/Restore

Expert users only: please note that this product comes with basic hardware support and does not include any tech support for the home automation software or host hardware you decide to pair it with