EAGLE Ignition Spark Plug V8 LEAD KIT 8CYL CHEV 8mm

8mm STAINLESS STEEL FERRITE SPIRAL CORE SILICONE IGNITION LEADS

Please note that your lead set for this application may differ from the photographs. It has not been possible to photograph the 4,000+ sets that Eagle manufacture.

• 90° standard style distributor boots (not HEI)
• 90° spark plug boots
• This set reaches over the top of the valve covers (other sets available to reach around the back of the valve covers or under the exhaust manifolds)
• High performance low resistance inner core
• Silicone insulation

The Eagle Eliminator Ignition Leads are a high performance replacement ignition lead set.

Lead Diameter: 8.0mm

Application: Passenger, Performance,

Commercial & 4WD vehicles including Super & Turbo charged motors.

Eliminator Leads are fitted with our 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

More ignition power means improved combustion efficiency so you can get better economy and more power across the RPM range. The Patented Dual-Mag design incorporates two premium Spiral Core magnetic suppression core conductors which are protected by a layer of braided fiberglass and then coated in hi-temp silicone to resist the harshest of under bonnet conditions.

Features:

Boot & Tube Assembly Features:

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features:

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Although we try to keep all of the popular combinations of Eagle ignition leads on the shelf, it is impossible to keep them all on the shelf especially when you take into account that Eagle make their sets in 5.0mm, 7.0mm, 8.0mm, 9.0mm, 10.5mm and 11.0mm silicone coated cable in 3 different colours. Then some engines different length sets that reach under exhaust manifold, over the valve cover and around the valve cover sets. On top of that we need to account for different spark plug boots and standard ignition distributor boots (female cap posts), HEI (male disi cap posts) and MSD boots.

When we have your leads in stock, we try to send the order out within 24 hours. If your set needs to be ordered from Eagle, please allow 3-10 days before shipping depending on Eagles production times. Please let us know if your set is urgent.

Please Note: Above specifications may vary due to technological advances at manufacturer’s discretion.

Warning: The product description above is to be used as a guide only. It is up to the purchaser/end user to determine the correct suitability/application of product to suit their individual requirements. Care must be taken when selecting product.

Leads may differ slightly from the attached photo. Some sets will need to ordered from the Eagle factory. Please allow up to 5 days before your leads are shipped.