HP Microserver Gen8 SSD drive mounting bracket

This is 3D printed, in fetching Prusa orange.

Pictures show this installed in my server. Bracket can hold 2 x 2.5" spinning rust drives or SSDs. Mounting is with the existing 2 screws holding the PSU to its rear mounting bracket. You may need some longer screws, mine were just long enough. They are 3/8" long 6-32 UNC screws which are standard 3.5" & 5.25" HDD screws, but longer. These screws are a pain to get to, but the L shaped tool you get with the Microserver just about fits. I am now including 2 of these 3/8" 6-32 screws, but they are Hex head, not Torx.

Drive mounting is best done with countersunk screws, as the back of the bracket is flat on the PSU. These are countersunk & printed at  3.5mm for clearance. 8x M3 x 6mm screws are included for mounting your drives.

You are buying just the orange 3D printed drive holder, 8x M3 x 6mm screws & 2x 3/8" 6-32 UNC screws, nothing else.



Postage will be £4.00 Ebay Packlink
Sorry about the cost. Too many of these are getting "lost in the post" so I'm using a tracking service from now on...

Any questions, please ask away.

You don't need to ask about combining postage, I will always try to combine & post things as cheaply as possible.

Please have a look at my other auctions, I'm having a bit of a clear out.

No returns, I am not a shop, or a business. But a private individual, selling items I no longer need from around the Smoke & pet free house.