Tilta Nucleus-M: Wireless Lens Control System Camera Nucleus-M Follow Focus Kits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Overview:

 

    [FOCUS IRIS ZOOM] via the FIZ or Left and Right Hand Grips

    [PRECISE FOCUS] via Marking Discs, A-B Limits, and Electronic Focus Marking

 

 

    [NO MDR NEEDED] Wirelessly Control the Motors Up to 1000 Feet

    [RUN STOP CAPABLE] via the REC Button on the FIZ/Hand Grips and Optional Run Stop Cables

 

 

    [COMPATIBLE] with Most Cinema Lenses via the Motor's 0.8 Gear Pitch or Included Gear Rings

 

 

The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system.

 

It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips.

You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.

The wireless range of both the hand unit and hand grips is 1,000 feet.

The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based

gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand

Grip Universal Gimbal Ring Adapters.

Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need

to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time.

Simply set the motors and hand unit/hand grips to the same channel and you will have full control.

The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don’t have hard

end stops at close focus and infinity.

The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings).

This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup.

Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses.

The torque of the Nucleus-M Motor at 14.8V is 2.5N·m

To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable

into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.

The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V.

The hand unit and hand grips are each powered with two 18650 rechargeable batteries (batteries NOT included).

When fully charged, the batteries in the hand grips last up to 2 days, while in the hand unit they last up to 10 hours.

Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor.

This then gives you R/S capabilities through the hand unit and/or the handles.

** PLEASE NOTE: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-M

since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M.

Only use cables that have been developed by us exclusively for the Nucleus-M system.

 

 

Specification:

 

Weight:

    FIZ Hand Unit (no batteries): 0.972 lbs

    Right Handle Grip (no batteries or adapters): 0.582 lbs

    Left Handle Grip (no batteries or adapters): 0.529 lbs

    Arri Rosette Male to Handle Grip Adapter: 0.161 lbs

    Gimbal to Hand Grip Adapter: 0.099 lbs

    Motor: 0.496 lbs

Motor Dimensions:

    Length/Height: 11.43cm

    Width: 8.26cm (end to end furthest points)

    Depth: 1.59cm (rod mount section), 1.91cm (base section), 3.49cm (motor section)

Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood

Color: Tilta Gray

 

 

Package Included: Selected

 

 

Full Kit w/ Hard Case

    (1) Wireless FIZ hand unit

    (2) Brushless wireless motors with 19mm rod support and 15mm rod bushings

    (1) Right wireless handle

        (1) Finger wheel

        (1) Zoom toggle

    (1) Left wireless handle

        (1) Finger wheel

    (4) Follow focus marking disks

    (1) 74cm 7-pin to P-tap motor power cable

    (1) 55cm 7-pin to 7-pin motor connection cable

    (1) 18cm 7-pin to 7-pin motor connection cable

    (2) Photographic lens follow focus adapters

    (1) 18650 quad battery charger (batteries included)

    (2) Handle to Arri Standard Rosette adapters

    (2) Handle to gimbal bar adapters (compatible with 25mm/30mm rod diameters)

    (1) Wireless FIZ hand unit strap

    (1) Hard shell waterproof safety case

 

 


Partial Kit I

    (1) Wireless FIZ hand unit

    (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings

    (1) Photographic Lens Follow Focus Adapter

    (1) 74cm 7-pin to P-tap motor power cable

    (1) Follow focus marking disks

    (1) Wireless FIZ hand unit strap

    (1) 18650 quad battery charger (batteries included)

 


Partial Kit II

    (1) Right wireless handle

        (1) Finger wheel

        (1) Zoom toggle

    (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings

    (1) 55cm 7-pin to 7-pin motor connection cable

    (1) Photographic Lens Follow Focus Adapter

    (1) 74cm 7-pin to P-tap motor power cable

    (1) Hand Grip to Arri Standard Rosette Adapters

    (1) Wireless FIZ hand unit strap

    (1) 18650 quad battery charger (batteries included)

 

 

Partial Kit III


    (1) Left wireless handle

        (1) Finger wheel

    (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings

    (1) 55cm 7-pin to 7-pin motor connection cable

    (1) Photographic Lens Follow Focus Adapter

    (1) 74cm 7-pin to P-tap motor power cable

    (1) Hand Grip to Arri Standard Rosette Adapters

    (1) Wireless FIZ hand unit strap

    (1) 18650 quad battery charger (batteries included)

 

 

Partial Kit IV

    (1) Wireless FIZ hand unit

    (2) Brushless wireless motor with 19mm rod support and 15mm rod bushings

    (1) 55cm 7-pin to 7-pin motor connection cable

    (1) Photographic Lens Follow Focus Adapter

    (1) 74cm 7-pin to P-tap motor power cable


    (1) Follow focus marking disks


    (1) Wireless FIZ hand unit strap


    (1) 18650 quad battery charger (batteries included)

 

 

Partial Kit V

    (1) Left wireless handle


        (1) Finger wheel


    (1) Right wireless handle


        (1) Finger wheel


        (1) Zoom toggle


    (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings


    (1) 55cm 7-pin to 7-pin motor connection cable


    (1) Photographic Lens Follow Focus Adapter


    (1) 74cm 7-pin to P-tap motor power cable


    (1) Hand Grip to Arri Standard Rosette Adapters


    (1) Wireless FIZ hand unit strap


    (1) 18650 quad battery charger (batteries included)

Payment is required immediately and we will despatch your order quickly!Payments can be accepted via paypal or payoneer, please send the payment in 14 days since you order the item, or there will be upaid case for the order from eBay automatically.If you don't want the item after ordering the item, please feel free to contact us to cancel the order, we will accept the request to cancel the order as requested.Many thanks

If the item is being sent from outside the EU, the recipient may need to pay VAT and customs duty. This will either be collected by eBay or by the carrier on behalf of the relevant customs/tax authorities.As of 1 July 2021, there is no longer a VAT exemption for small consignments up to EUR 22 and eBay will be required to collect VAT on certain orders delivered to EU addresses:

Orders up to a value of EUR 150 imported into the EU and sold to consumers (for shipments to Metropolitan France and Monaco, see next point)
Orders of any value shipped from outside of the EU to consumer buyers in France or Monaco
For shipments of any value where the seller is a non-EU business, but the goods are already within the EU

In cases where eBay is not responsible for collecting VAT, the amount of VAT and customs duty will be determined upon entry into the destination country. As a result, buyers may need to pay additional charges that are not included in the total price displayed at checkout such as VAT, duty and an import processing fee from the carrier.

    1.We only ship to paypal registered address . So please be assuring your address in paypal is correct and valid .
    2.Please read for your own benefit and understanding on our shipping items
    3.All the items will be dispatched to worldwide within 2-3 business day via SPEEDPACK or EXPRESS, It depends on what you select for shipping the parcel.
    4.We ship the product via SPEEDPAK from China if it  is available, For the countries which can not ship parcels via Speedpak, we will ship parcels via standard
    5.purchase price do not cover any applicable tax or duty that might be charged by customs ,buyers are responsible for such charges
    6.We will ship to you within 24 hours after receipt of your order, and we are committed to free international logistics.Many thanks
1.After receiving the item, contact seller within 30 days.
2.Return shipping will be paid by seller if there is problem on the items, but we will not pay for the return shipping for wrong orders or buyers change mind on their orders.
3.Return policy details
4.Returns allowed for 30 days on unwanted items.
5.Item must be unused and unopened.
6.Return postage to be borne by customer.
7.Damaged or Faulty Items - please inform us on receipt and we can arrange for replacements/returns/refunds on an individual basis.
8.This does not affect your statutory rights.Many thanks
We have our own professional R&D testing team, our own factory to make products, we are one of the largest production manufacturers in China, we also have offices as well as warehouses overseas. Our team is committed to research and development and sales of the latest models of the most convenient and unique products, thank you, I hope you more support, the seller will often send OFFER to the collector!
Please free free to contact us on ebay if there is any problems about the items and order, we would work the issue out for you as long as we get the messages.Customer service is available online from 2.00am-13:00pm local time.Thanks
PushAuction