Shelly WiFi RGBW Bulb E27

Shelly WiFi RGBW Bulb E27 Wi-Fi operated Bulb Set the light to suit your mood. With the dimmer slider, you can adjust the brightness and color of the Shelly RGBW bulb. Shelly Bulb welcomes you at home and lets you control your lights from your bedroom to your backyard. It even makes it seem like you’re home when you’re not. It’s all about simplifying your life with the smartest WiFi RGBW bulb in the world. KEY FEATURES Embedded webserver Can function as a standalone device, as an accessory to a home automation controller, or it may be uséd as another automation system's component Designed for installation in a standard light socket – E27 (also compatible with E26 sockets) Variable color modes – Mix red, green, blue and white to get the perfect color to suit your mood or your needs Power Power Rating RGB: 9W; Natural White: 9W Socket E27 Power supply AC 100-240VAC ±10%, 50-60Hz Power supply DC No Special functions Device temperature protection No Overload protection No Power measurement Yes Dimming Yes Features Brightness RGB-W: 800 LM Colour changing Yes Colour Temperature RGB + Natural White 4000K Filament LED Glass/Coating Matte Predefined effects Yes Protection Class IP20 Operational temperature -20ºC to +40ºC Device power consumption < 1.5 W (off) Intelligent On/Off Yes Local and remote control Yes Sunrise/Sunset Yes Weekly Schedule Yes Lifetime 30,000 hours Connectivity Wireless/WiFi Protocol 802.11 b/g/n Radiofrequency 2400 - 2484 MHz Radio signal power 1mW Range up to 50 m outdoors and up to 30 m indoors (depending on the building materials) Dimensions Size 60mm x 122mm   Standard warranty (included in purchase price): 24-month manufacturer warranty due to device malfunctions when it is uséd in user manual described conditions. NOTES Simply turn the bulb on and off 5 times. If you do not have a switch connected, then you will need to move the bulb to a location that does or use an alternative method to switch the power to the bulb on and off again. Be sure to wait 2-3 seconds before powering the device back up. When the Shelly lightbulb starts to flash, it will return to AP mode meaning the it has completed the Reset procedure. The Shelly RGBW bulbs will flash in red until you turn it off and on again, where the color will change to blue indication it has been reset and in AP mode. On occasion, if the device did not start the reset procedure, you may be required to try again.