Exedy Hyper Single Clutch For Acura NSX 1991-2005 V6 Sprung Center Disc Cover | HH04SD1

FEATURES

• Exedy 1991-1996 Acura NSX V6 Hyper Single Clutch Sprung Center Disc Pull Type Cover
• Part Number: HH04SD1
• Hyper Single Clutch
• Sprung Center Disc
• Factory Sealed - Brand new in box

ADDITIONAL INFO

• Supplier Title: Exedy 1991-1996 Acura NSX V6 Hyper Single Clutch Sprung Center Disc Pull Type Cover

PRODUCT DESCRIPTION

PRODUCT OVERVIEW:
- The EXEDY Hyper Single Series clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to our multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover. Additionally, the pressure plate features a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.

All Hyper Single clutches come with a chromoly steel flywheel and are normally supplied with a 6-puck cerametallic facing and a spring center damper disc assembly. However, on select vehicles, the new VF (Various Friction) disc may be offered. The chromoly flywheel is lighter than OEM for improved engine response, and a lighter overall assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and higher than other single disc clutches.

PRODUCT INFO:
- Exedy 1991-1996 Acura NSX V6 Hyper Single Clutch Sprung Center Disc Pull Type Cover
- Clamp Load: 2922
- Disc Diameter (inches): 8.9
- Disc Diameter (Millimeters): 225
- Kit Contents: CH13S1, DH10D1, FH19, BS04
- Spline Count: 24
- Spline Size (inches): 1
- Spline Size (Millimeters): 26
- Torque Capacity (ft/lbs.): 375

MANUFACTURER PART NUMBER:
- Part Number: HH04SD1

ADDITIONAL INFO:
- Hyper Single Clutch
- Sprung Center Disc
- Pull Type Cover
- Requires Flywheel Crank Bolts Part # 90011-PR7-000 (8pcs)
- For use with Hyper Accessory Kit HCAK102