OTTOSEAL® P720 580 ml The PU sealant for RAL installation on the outside Can be painted over

We all have OTTO CHEMISTRY Products in the range.

OTTOSEAL® P 720
The PU sealant for RAL installation outside

1K polyurethane sealant
For outside
RAL assembly
Can be painted over
Long-lasting and robust joint
Silicone free

Product details
The special PU sealant for RAL outdoor installation OTTOSEAL® P 720 meets the necessary requirements of the RAL installation guidelines thanks to its product properties “tight to driving rain” and “open to vapor diffusion”. Together with OTTOSEAL® A 710 for internal sealing, it forms a tested system for RAL installation with sprayable sealants.

Characteristics
Meets the requirements of the RAL assembly guidelines (e.g. high water vapor permeability)
Meets tender requirements for component-tested systems and installations
Silicone free
Paint compatible according to din 52452
No interactions with existing and adjacent coatings
Can be painted over / can be painted over - please note the application instructions in the technical data sheet
Visual adjustments and protective coating possible
Good weather and aging resistance
For long-lasting indoor and outdoor applications
Cures without bubbles
Suitable for visually demanding joints

application areas
For RAL installation OUTSIDE
For the external sealing of connecting joints between the window and the building that is impervious to driving rain and open to vapor diffusion. Can be used in the system with OTTOSEAL® A 710 (internal sealing).

Standards and tests
Tested according to EN 15651 - Part 1: F EXT-INT CC 25 LM
Component testing “Airtightness and driving rain tightness of a sealing system between window and building structure after simulated short-term loads” (ift Rosenheim)
For applications according to IVD data sheet no. 9+12+24+27+31+35 suitable
French VOC emission class A+
EMICODE® EC 1 Plus - very low emissions
Tested fire behavior according to EN 13501: Class E
For classification according to building certification systems, see sustainability data sheet

For technical reasons, the colors shown may differ from the original colors of the products.

Color
white

Delivery form:
1 aluminum foil bag 580ml each

Safety notice:
Keep out of reach of children.
Always read the label and product information before use.

· Classification of the substance or mixture
· Classification according to Regulation (EC) No. 1272/2008
GHS07
Skin Sens. 1 H317 May cause an allergic skin reaction.
· Identification elements
· Labeling according to Regulation (EC) No. 1272/2008
The product is classified and labeled according to the CLP regulation.
· Hazard pictograms GHS07
· Signal word Danger
· Hazardous components for labeling:
Pentamethylpiperidyl sebazate
Hardener LI (Isophoronedialdimine)
· Hazard warnings
H317 can cause allergic reactions to your skin.
· Safety instructions
P102 Keep out of reach of children.
P271 Use only outdoors or in well-ventilated areas.
P280 Wear protective gloves/eye protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P312 IF INHALED: Call a POISON CENTER/doctor if you feel unwell.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
wash. If possible, remove any contact lenses. Further
wash. Get medical advice/attention.
· Additional information:
Contains isocyanates. Can cause allergic reactions.
Contains epoxy-containing compounds. Can cause allergic reactions.
· Other dangers
Note according to Annex XVII.56 REACH:
People who are already sensitized to diisocyanates may not be able to handle this product
trigger allergic reactions.
Contact with asthma, eczematous skin diseases or skin problems, including
Avoid skin contact with the product.
Do not use the product if there is insufficient ventilation or wear a protective mask with an appropriate one
Wear a gas filter (type A1 according to EN 14387).
· Results of the PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.