Detail

NOTE:
Due to the same car model in different country will be a little difference, so please provide us your car center console A-off button picture to our customer service before purchasing, we will help you check the compatible to make sure it will fitted your car, thank you very much!
 
Features:
Start-stop module has a memory mode, Auto-off mode,Service mode to avoid the deficiencies of start-stop functions.
The use of intelligent chip, no lag, stable current, will not cause the current over the phenomenon of damage
Effectively prevent engine,battery,spark plug etc damage caused by frequent start.
Plug and play, easier to install. Professional Installation Is Highly Recommended!!!
 
3 Modes Introduction:
1.Auto-off mode: every time the car is started, the start-stop will be automatically turned off. If it is manually turned on in the middle, it will still be turned off after the car is turned off and locked.
2.Memory mode: Manually switch the start-stop switch once, and the start-stop state will be saved and memorized, and will not be affected by power failure.
3.Service mode (original factory mode): Start-stop treasure does not work by default, the effect is the same as the original car.
 
The mode switching method:
The mode switching method adopts the 3+X method to switch.
1. Turn off the start and stop first, wait for more than three seconds,
2. Press the start-stop switch three times in succession (after pressing it, the start-stop is turned on, wait for it to automatically turn off);
3. Immediately after the start-stop is automatically closed, press the start-stop switch three (or two or four times) consecutively, and then wait for the indicator to reverse. Then enter the automatic shutdown mode (or memory mode, original factory mode).
 
Specification:
Color: Black
Length:15cm/5.91inch
Material: ABS Plastic
Rated Current: 12A
Function: Close the auto stop start engine
Quantity: 1 Piece Start Stop Engine Connector Cable
 
Fitment:
For VW Tiguan
(The car type in reference only, please contact with our customer service firsty before payment, thank you!)
 
Installation steps:
Find the original car plug switch interface, and the original car start and stop switch button can be transferred.

Friendly Remind:

It usually can be directly inserted for use. If it can't directly installation, please contact with our customer service firstly, please do not leave a neutral/Negative feedback or initiated a return requestion without communication, thank you for your understanding & supporting.

The product doesn't include installation instructions, we can provide the installation video or step if you need. But we are recommended the professional installation.

Copyright © 2017 DataCaciques

Product View

Detail

NOTE:
Due to the same car model in different country will be a little difference, so please provide us your car center console A-off button picture to our customer service before purchasing, we will help you check the compatible to make sure it will fitted your car, thank you very much!
 
Features:
Start-stop module has a memory mode, Auto-off mode,Service mode to avoid the deficiencies of start-stop functions.
The use of intelligent chip, no lag, stable current, will not cause the current over the phenomenon of damage
Effectively prevent engine,battery,spark plug etc damage caused by frequent start.
Plug and play, easier to install. Professional Installation Is Highly Recommended!!!
 
3 Modes Introduction:
1.Auto-off mode: every time the car is started, the start-stop will be automatically turned off. If it is manually turned on in the middle, it will still be turned off after the car is turned off and locked.
2.Memory mode: Manually switch the start-stop switch once, and the start-stop state will be saved and memorized, and will not be affected by power failure.
3.Service mode (original factory mode): Start-stop treasure does not work by default, the effect is the same as the original car.
 
The mode switching method:
The mode switching method adopts the 3+X method to switch.
1. Turn off the start and stop first, wait for more than three seconds,
2. Press the start-stop switch three times in succession (after pressing it, the start-stop is turned on, wait for it to automatically turn off);
3. Immediately after the start-stop is automatically closed, press the start-stop switch three (or two or four times) consecutively, and then wait for the indicator to reverse. Then enter the automatic shutdown mode (or memory mode, original factory mode).
 
Specification:
Color: Black
Length:15cm/5.91inch
Material: ABS Plastic
Rated Current: 12A
Function: Close the auto stop start engine
Quantity: 1 Piece Start Stop Engine Connector Cable
 
Fitment:
For VW Tiguan
(The car type in reference only, please contact with our customer service firsty before payment, thank you!)
 
Installation steps:
Find the original car plug switch interface, and the original car start and stop switch button can be transferred.

Friendly Remind:

It usually can be directly inserted for use. If it can't directly installation, please contact with our customer service firstly, please do not leave a neutral/Negative feedback or initiated a return requestion without communication, thank you for your understanding & supporting.

The product doesn't include installation instructions, we can provide the installation video or step if you need. But we are recommended the professional installation.

Good News For DE Customers:
For DE shipping address, the order will be shipped to you from DEwarehouse preferentially. But if DE warehouse is out of stock, then it will be shipped from SZ warehouse.

Please kindly pay attention:
Postage and handling fee above does not include any remote area fee.
We don't offer free shipping to some subsidiary islands
We will ship the products within 1 business day after clearance of payment. We will choose the lowest price for your cities. They usually take 5-12 working days for delivery to most of the international cities. In our experience, around 10% items will take longer than that due to the customs clearance.

Confirmed address before sending
Once we send out:
1. You could NOT reroute
2. You could NOT hold for pick up
3. You could NOT correct the address
The courier company will return the package to us after tried to deliver the product to buyer two times. If buyer request us to resend the parcel, buyer should be responsible for all the return and resend postage. Above is the policy of Courier Company, hope we could get your understanding and attention.

International Buyers – Please Note
We are NOT responsible for ANY import tax, customs fee, or customs delay. If the parcel return back to us due to the buyers refuse to pay the above fee, we would NOT send the parcel again unless the buyer complete those fee and pay ALL the return and resend cost. Buyer can not cancel the order or request refund due to the above reason.

Unconditional Return within 30 Days
We will provide Exchange or refund (Buyer's choice) for the defective product or dissatisfied purchase which reported within 30 Days.

One Year Warranty
All our items are brand new. We provide one year warranty for all our products from the date of purchase. Please kindly fill the online warranty card after you receive the product.

Attention:
1. Customer is responsible for the return shipping fee; we will pay for sending the item back to customer.
2. We suggest that ask professional to install products and contact us when installing issue happened. However, we are not responsible for installing or uninstalling.

Damage or missing components
Our products are all brand new and inspected carefully before sending out. Please check the package before the courier leaves.
If you receive a broken item or missing part, please keep the original package and email the photos & your contact number to us within 5 days.
If products possibly damage during delivery, customers have to report in 5 days with your contact number and photo showing damage. Meanwhile, it may take about 15 days for the shipping company to investigate the case, thanks for your understanding.

Important note
The situation below does NOT meet the warranty policy requirements.
1. Install and operate products inappropriately.
2. Warranty seal is removed or damaged
3. Product is opened or repaired by unauthorized person.


On 18-Apr-2024 at 02:01:03 BST, seller added the following information:

DataCaciques