Ultimate JAMMIX PRO is a COMPLETE MISTer SETUP which includes DE10-nano, XS-DS v3 128MB SDRAM (official memory module), Pre-installed 16GB SD card.

• Simultaneous buffered RGB output via JAMMA and “VGA” port;
• ​​
• Sync-On-Y circuit, for Component output via “VGA” port (JAMMA RGB output not available in Component mode)​;
• ​​
• JAMMA RGB levels are 4V (p-p), for best compatibility with standard arcade monitors with buffered TTL Csync output on JAMMA edge;
• ​​
• Onboard Stereo audio amp, for Neo Geo style cabinets. Neo Geo MVS harness compatible;
• ​​
• I2S audio DAC for higher quality, new rich, improved, stronger sound analog output and  amplified headphones output;
• ​​
• Buffered Audio line-out;
• ​​
• Audio line-in (no need for the standard ADC add-on);
• ​
• Onboard USB 2.0 hub. Four External USB 2.0 ports, two on an internal header;
• ​
• Ethernet routed to the IO shield;
• ​
• Self-resetting (PTC) fuses on all USB ports, DE-10 nano, and User I/O port (SNAC);
• ​
• Over-voltage protection on the 5V rail, to help protect the DE10, USB devices, and JAMMIX (OVP works whether using JAMMA, ATX, or 5V DC jack);
• ​
• ​​
• ATX power with soft power on/off, and front panel buttons/LEDs headers (soft power option also available when powered via JAMMA or 5V DC jack);
• ​
• Fan board with Noctua fan
• ​
• JAMMA edge connector, with “Gold fingers” and beveled edge, to prevent damage to the harness socket;
• ​
• Support for the extra “CHAMMA” style button inputs, for up to six buttons per Player 1 & 2;
• ​
• CPS2 style “Kick” header, with 22 extra player control inputs, including configurable support for Players 3 & 4;
• ​​
• Replicates the functions of the v6.1 IO Board (LED outputs and button inputs are available on the front panel header. Secondary SD signals broken out to a header.);
• ​
• Mounting holes for 2.5″ HDD/SSD;
• Case made of high quality Aluminium alloy  197 x 197 x 65 mm.

Full assembled setup, package contents includes:

• 1 x High quality case
• 1 x DE10-nano with heatsink
• 1 x JAMMIX Main Board (ITX / JAMMA)
• 1 x 16GB  SDCard 
• 1 x 128 MB MiSTer v2.9 or higher (official memory module)
• 1 x USB Cable
• 1 x Ethernet Cable
• 1 x IO Shield
• 1 x Noctua Fan Board
• 7 x jumpers (may already be on JAMMIX IO Board)
• 1 x IDC 10 Pin Ribbon Cable
• 1 x IDC 20 Pin Ribbon Cable
• 1 x IDC 40 Pin Ribbon Cable
• 4 x Arcade Stand off feet
• 4 x 14 mm Brass Standoffs
• 4 x 20mm Brass Standoffs
• 12 x 3M Screws (may be various sizes)
• ITX Blackplate

Please Note: the back plate may differ in design.