Why purchase a NEW replacement keyless entry remote transmitter?
The vehicle keyless entry remote key fob you are going to purchase from us is BRAND NEW. We seek out ONLY quality replacement remote manufacturers to ensure the key fob we sell to you is of the highest quality. Here at KeylessRemoteWarehouse we test to ensure that the shells or outer housing are made to resist cracks and breaks upon being dropped. Let?s face it; we all are going to drop our key set from time to time. We ensure that the keyless entries button pads are going to last; buying a new replacement remote control from us puts you at a longevity advantage over purchasing a used part that already has considerable wear. Even the circuit boards we choose are high quality clones with new solder joints and new resistors to ensure that they will last for the long haul. We guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun J. Why wait? Add some convenience to your daily routine and help save the environment, order your NEW replacement car remote control today!
What are you purchasing?
This is ONE (1) NEW replacement keyless entry remote with Batteries Installed, aka "key fob" that will work with your compatible OEM (Original Equipment Manufacturer) Factory installed RKE system once successfully programmed to your vehicle.
Compatibility: Works with vehicles that use a factory keyless entry system listed in our compatibility section above AND below.
|
FCC ID#(s) |
FITS A269ZUA106 |
|
Alternate Spellings |
A26-9ZUA106, A26 9ZUA106, A269ZUA106, A269ZUA1O6, A269ZUAI06 |
|
Part #(s) |
FITS H/C 6134746 Canada: 700 102 1256 Part #: 72147-S04-A01 / 72147-S04-A02 Ilco C/R: AX00012790 (RKE-HON-3B3) |
|
Dealer #(s) |
FITS 72147-S04-A01 |
|
Button Count |
3; Lock, Unlock, Panic |
|
Battery (installed) |
1; CR2025 |
|
Frequency /LED LIGHT COLOR |
433
MHz / RED |
|
COMPATIBILITY |
FITS HONDA CIVIC COUPE
1996 1997 1998 1999 2000 |
|
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. |
Programming the Transmitter NOTES: • The system accepts up to three transmitters. The transmitter codes are stored in a stacking-type memory. If a fourth transmitter code is programmed, the code for the first transmitter is erased. • Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode. • You must complete steps 1–6 within 4 seconds of the previous step to keep the system from exiting the programming mode. 1. Turn the ignition switch to ON (II). 2. Press the “Lock” or “Unlock” button on one of the transmitters. (An unprogrammed transmitter can be used for this step.) 3. Turn the ignition switch to LOCK (0). 4. Repeat steps 1, 2, and 3 two more times using the same transmitter used in step 2. 5. Turn the ignition switch to ON (II). 6. Press the “Lock” or “Unlock” button on the same transmitter. Make sure the power door locks cycle to confirm that the system is in programming mode. 7. Within 10 seconds, press the “Lock” or “Unlock” button on each transmitter. Make sure the power door locks cycle after you press each transmitter button to confirm that the system accepted the transmitter’s code. 8. Turn the ignition switch to LOCK (0) to exit the programming mode. |
|
Condition Notes |
BRAND NEW REPLACEMENT |
Installed RKE System Type:
Please be sure you have a FACTORY (RKE) remote keyless entry system. It was not standard on all vehicles. If your current remote looks the same then this will work. Other options include: Dealer Installed or Aftermarket. The system installed in your vehicle will CHANGE the required remote. If you are unsure ask your local dealer they will need your VIN # (Vehicle Identification Number (located on our vehicle registration car, on your driver side door jam, or your windshield (lower left drives side))).
Why does your vehicles installed RKE / Security system determine which remote control your can purchase?
The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.
Programming:
We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.
Programming Requirement Information NOTE:
The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:
1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.
2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.
To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:
i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)
ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)
3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.
4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).
5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).
6. There are also many auto forums that you can go onto by just conducting a google search with your questions.
7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.