About This Items
specification
Reaping method: Upper/lower low speed rotating scissors cutting method
Dimensions: L258 x W230 x H98mm
Weight: 1.8kg
Appearance: Aluminum (A5052)
Reduction method (reduction ratio):
Planetary gear reduction upper blade 1: 18.8, lower blade 1: 13.5
Recommended engine 23cc~
accessories
This is the Super Kalmar PRO series with an improved blade protection cover gear unit.
The new mechanical joint system allows it to be installed on brush cutters of various sizes.
You can slide it on the ground and feel no weight.
Easy to install on your existing engine brush cutter
The counter-rotating scissor cutting method with the upper and lower blades produces very little scattering, helping to prevent mowing accidents.
You can work safely around buildings, in parking lots, and in areas with many people and cars, and improve work efficiency even in dangerous locations.
Since it has two blades, it will only cut what is caught between the two blades.
Even if the blade touches an obstacle, there is little rebound (kickback) and it is safe.
In addition, there are no blades on the outer periphery, so even if it comes into contact with obstacles and trims edges, the sharpness will not be affected.
The scissor type allows you to cut grass beautifully.
A unique reduction mechanism reduces engine speed to approximately 1/20.
It has 20 times more torque and can cut grass more powerfully.
In addition, when you return the throttle lever, the rotating blade stops instantly, making it safe even in emergencies.
It can be easily removed with radio pliers, and the blades can be easily sharpened.
Parts can also be replaced by bolt-on.
You can quickly replace the blade with a spare blade at the work site.
Complete installation by replacing the engine brush cutter gear case.