Yuasa 6N4B-2A-3 (DC) 6V Dry Charged Conventional Battery

Yuasa 6N4B-2A-3 (DC) 6V Dry Charged Conventional BatteryDry charged battery supplied without acid, but acid packs are available seperately, see our part numbers 4220003 and 4220004.Please note: This battery should never be fitted on it's side. It is only suitable for vertical fitment. Vent hoses must never be obstructed and run safely to a clear spot where acid leaks cannot contact the machine.This Conventional battery is the industry standard for motorcycles, snowmobiles and ride-on mowers.Specifically designed to protect against seepage and corrosionMade to withstand vibrationPlease note: This battery should never be fitted on it's side. It is only suitable for vertical fitmentMost problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity.This will definitely result in a much shorter service life or other battery problemsFill the battery to the indicated levelCharge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.Failure caused by incorrect activation or charging is not covered by the warrantyFurther research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by SULFATION.This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced.This is not caused by a faulty battery, it is a fault with maintenance.Please ensure batteries are kept charged on a suitable charger when not in useYumicronPersonal watercraft, snowmobiles and ATVs make special demands - and YUASA's YuMicron Battery meets them headon. The high-tech, power-boosting design also makes YuMicron ideal for accessory-laden touring bikes and modified vehicles. Heavy duty glass mat resists vibration damage Special thin Separator packs in extra plates, delivers up to 30% more cranking power than conventional types Through-the-wall intercell connector minimises internal resistance, maximises power Sulphate Stop curbs plate sulphation - and provides longer life Manufacturer Part No. (MPN): 6N4B-2A-3(DC)Barcode (EAN): 5050694005190Commodity Code: 85071020

Yuasa 6N4B-2A-3 (DC) 6V Dry Charged Conventional Battery

Dry charged battery supplied without acid, but acid packs are available seperately, see our part numbers 4220003 and 4220004.Please note: This battery should never be fitted on it's side. It is only suitable for vertical fitment. Vent hoses must never be obstructed and run safely to a clear spot where acid leaks cannot contact the machine.This Conventional battery is the industry standard for motorcycles, snowmobiles and ride-on mowers.Specifically designed to protect against seepage and corrosionMade to withstand vibrationPlease note: This battery should never be fitted on it's side. It is only suitable for vertical fitmentMost problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity.This will definitely result in a much shorter service life or other battery problemsFill the battery to the indicated levelCharge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.Failure causéd by incorrect activation or charging is not covered by the warrantyFurther research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are causéd by SULFATION.This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced.This is not causéd by a faulty battery, it is a fault with maintenance.Please ensure batteries are kept charged on a suitable charger when not in use

Yumicron

Personal watercraft, snowmobiles and ATVs make special demands - and YUASA's YuMicron Battery meets them headon. The high-tech, power-boosting design also makes YuMicron ideal for accessory-laden touring bikes and modified vehicles.

Heavy duty glass mat resists vibration damage
Special thin Separator packs in extra plates, delivers up to 30% more cranking power than conventional types
Through-the-wall intercell connector minimises internal resistance, maximises power
Sulphate Stop curbs plate sulphation - and provides longer life

Manufacturer Part No. (MPN): 6N4B-2A-3(DC)
Barcode (EAN): 5050694005190
Commodity Code: 85071020