This galvanized iron plate watering can by the Danish company PLINT features a classic English design and outstanding quality. The iron used to make this watering can is significantly thicker than many conventional metals, and the welded seams are very stable. A 460 ° C immersion bath in zinc alloy at the end of the manufacturing process gives these watering cans an exceptionally sturdy surface. This creates watering cans of exceptional quality with a long service life.

Details

• Made of hot-dip galvanized metal with powder coating
• Classic English shape
• With two handles for easy pouring
• High-quality brass showerhead
• Hand welded
• Color: Winter White
• Capacity: 5 liters, 1.32-gallons
• Dimensions:
• Height: 9/13 inches (top of handle)
• Diameter: 9 inches
• Width: 18.5 inches
• Made in Slovakia

From the Manufacturer

Our watering cans are produced to last for many years. They are made in thicker iron plates than normal, stronger welds and a rough finish. When the watering cans are finished, they are hot galvanized. They are immersed in a zinc alloy that is 460 degrees hot.  The zinc adheres to the iron as a thick syrup. When the jug comes up again, it hangs and drips for 20 minutes. This is the absolute best way to prevent the iron from rusting.  The jugs to be colored are then hung on hooks and run through a powder coating tunnel, where the paint adheres to the hot-dip galvanized zinc layer.  This is where the jugs get the characteristic surface that resembles that too much paint has come on. But it is the thick and uneven zinc layer that emerges.  The jugs that do not get paint, the ones keeping the zinc color, start a slow oxidation process.