Ultimate JAMMIX PRO is a COMPLETE MISTer SETUP which comes with DE10-nano included, XS-DS v3 128MB SDRAM (official memory)
- Simultaneous buffered RGB output via JAMMA and “VGA” port;
-
- Sync-On-Y circuit, for Component output via “VGA” port (JAMMA RGB output not available in Component mode);
-
- JAMMA RGB levels are 4V (p-p), for best compatibility with standard arcade monitors with buffered TTL Csync output on JAMMA edge;
-
- Onboard Stereo audio amp, for Neo Geo style cabinets. Neo Geo MVS harness compatible;
-
- I2S audio DAC for higher quality, new rich, improved, stronger sound analog output and amplified headphones output;
-
- Buffered Audio line-out;
-
- Audio line-in (no need for the standard ADC add-on);
-
- Onboard USB 2.0 hub. Four External USB 2.0 ports, two on an internal header;
-
- Ethernet routed to the IO shield;
-
- Self-resetting (PTC) fuses on all USB ports, DE-10 nano, and User I/O port (SNAC);
-
- Over-voltage protection on the 5V rail, to help protect the DE10, USB devices, and JAMMIX (OVP works whether using JAMMA, ATX, or 5V DC jack);
-
-
ITX case with custom wood design
-
- Fan board with Noctua fan
- 2 Fractal fans for extra cooling
- JAMMA edge connector, with “Gold fingers” and beveled edge, to prevent damage to the harness socket;
-
- Support for the extra “CHAMMA” style button inputs, for up to six buttons per Player 1 & 2;
-
- CPS2 style “Kick” header, with 22 extra player control inputs, including configurable support for Players 3 & 4;
-
- Replicates the functions of the v6.1 IO Board (LED outputs and button inputs are available on the front panel header. Secondary SD signals broken out to a header.);
-
- Mounting holes for 2.5″ HDD/SSD;
- Case made of high quality Aluminium alloy 197 x 197 x 65 mm.
Full assembled setup, package contents includes:
- 1 x High quality case
- 1 x DE10-nano with heatsink
- 1 x JAMMIX Main Board (ITX / JAMMA)
- 1 x 1TB SDCard
- 1 x 128 MB MiSTer v2.9 or higher (official memory module)
- 1 x USB Cable
- 1 x Ethernet Cable
- 1 x IO Shield
- 1 x Noctua Fan Board
- 7 x jumpers (may already be on JAMMIX IO Board)
- 1 x IDC 10 Pin Ribbon Cable
- 1 x IDC 20 Pin Ribbon Cable
- 1 x IDC 40 Pin Ribbon Cable
- 4 x Arcade Stand off feet
- 4 x 14 mm Brass Standoffs
- 4 x 20mm Brass Standoffs
- 12 x 3M Screws (may be various sizes)
- ITX Blackplate
Please Note: the back plate may differ in design.
Keyboard, joystick & speakers NOT included