Features & details

【ESD Grounding Plug】The ESD Plugs comes with two insulating plastic pins and a metal grounding pin which keep Safe grounding even if there is a 120V Voltage in the Plug. You can use the Grounding Plug to ground if there is US Socket.

【Easy to Use】Grounding Adapter Earth Bonding plug is easy and more convenient to use in EPA. You can connect your wrist strap, ESD mat and any other ESD Devices. Don’t use Crocodile clip to clip metal or grounding wire any more since you don’t know if they are grounding or not.

【Widely Application】 ESD Grounding plug is necessary and easy to combine to use with wrist strap and table or floor mat in electro-static control when Assembling or repairing electronic product such as smart phone, computer, tablet, sport watches, smart toy, IC circuit boards and other electronic devices repair.

【New Design】Anti static Plug is a new design with a Round Triangular Body makes it easy to insert and remove. It can be moved at any time if you need and don’t worry about damage it.

【Professional ESD Plug】ESD Grounding Plug, Build in 1Meg ohm Safety Resistance, use for ESD Control. Perfect to work with anti static Mat ESD Wrist Strap, Grounding Cord. It comes with 1 banana Jack and 2 10 mm male studs.

INSTRUCTION

The plug fits directly in to the mains supply socket, connecting with only the earth conductor. Live and Neutral pins have been molded in insulating plastic, fitting into the supply socket but completely dormant.

The 1M Ohm resistor to each connector offer protection in the event the workstation becomes live. That protection would limit the current to less than 0.3mA at 240 volts. Should the fault current continue the resistor will open circuit.

IInsert the plug into the supply socket making sure it is fully home, then connect the various elements of the EPA...such as ESD wrist strap,ESD Mat, Grounding Cord,Equipment and so on. This ensures that the EPA is at the same earth potential. As generally the workstation has more than one plug socket it is possible to use more than one EBP if more connections are required

The EBP is sealed and cannot be opened for repair. To test each connection use a multi-meter from the connector to the earth pin. The reading should be between 0.9 and 1.1M Ohms. As each connection point has its own 1M Ohm resistor, the resistance between two connectors should be approximately 2M Ohms. All EBP's are tested and then packed.

Applications

Work with Wrist strap

Work with ESD Mat

Work with Equipment

How To Test The Conductivity

KooMall ESD kit system resistant is 1-3M Ohms. There is 1M Ohms Safety Resistor in each grounding part. That is, there is 1M ohms in ESD Plug, ESD Wrist Strap Coiled Cord and Grounding Cord. So, when you test any part of conductivity by multimeter. You need to choose the right channel which resistance is more than 2M Ohms. Otherwise, there is not any value in multimeter.