SCALA2 3-45
No. 98562862
Grundfos SCALA2 is a fully integrated, self-priming, compact waterworks for pressure boosting in domestic applications. SCALA2 incorporates integrated speed control enabling the keeping of the perfect pressure at the taps, meaning that the pump performance will increase with increasing demand.
SCALA2 can be installed in three easy steps:
1. Connect the pipes. 2. Prime the pump. 3. Plug the pump into the power outlet and the pump will start.
Grundfos SCALA2 has all the components necessary to ensure a comfortable pressure:
- intelligent controller
- integrated speed-controlled drive
- integrated tank
- integrated sensors
- integrated non-return valves.
As it is self-priming, the SCALA2 is able to pump water from a level below the pump. Provided it is filled with water, the pump is able to lift water from a depth of 8 m in less than 5 minutes. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes.
If exposed to dry running, water shortage or excessive temperature, blocked pump, for example in case of seizure or overload, the pump will stop automatically, thus preventing a motor burnout.
The pump features an automatic reset function. In case of dry running or similar alarm, the pump will stop. Restarting will be attempted every 5 minutes 8 times, there after new restart attempt will occur every 24 hours. The automatic reset function can be deactivated.
Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump is extremely low-noise, 47 dB(A) in typical use, which makes it suitable for indoor as well as outdoor use. Max noise level at full load are 53 dB(A)
The built-in pressure tank reduces the number of starts and stops in case of leakages in the pipe system, causing less wear on the pump.
SCALA2 require no maintenance, but it is recommended to keep the pump clean, check the non-return valves and keep the ventilation holes free of dust.
Technical
Rated flow
Maximum flow
Rated head
Maximum head
Primary shaft seal
Approvals
Approvals for drinking water
Curve tolerance
Model
Max. pump speed
Materials
Pump housing
Impeller
Material code
Installation
Range of ambient temperature
Maximum operating pressure
Maximum permissible inlet pressure
Pipe connection standard
Type of inlet connection
Type of outlet connection
Size of inlet connection
Size of outlet connection
Pressure rating for connection
Liquid
Pumped liquid
Liquid temperature range
Selected liquid temperature
Density
Electrical data
Power input P1
Rated power - P2
Mains frequency
Rated voltage
Minimum current consumption
Maximum current consumption
Enclosure class (IEC 34-5)
Insulation class (IEC 85)
Length of power cable
Power plug
Controls
Type of connector
Others
Net weight
Gross weight
Shipping volume
Storage temperature range
Danish VVS No.
Swedish RSK No.
Finnish LVI No.
Norwegian NRF no.