Custom made transmission mount for the 89-93 Dodge Ram W250/W350 and possibly for the Ram Charger with the same lower crossmember from a W250/350 that has been converted or plans to convert to a NV4500 transmission. Made of a combination of 10 ga. lower bracket w/dimple die for reinforcement, 1/4" base and 3/16" upper mount (2Pcs total).  Recap: This mount is for anyone who plans or has upgraded their transmission to the NV4500 4WD for the 1st Gen Dodge/Ram Charger and wants a good looking stout mount.  This custom mount will center the weight of the transmission with T-case on the mount and made out of the same material thickness as the original riser plate.  (This will come in raw steel, no logos and will include bolts, washer and nuts).  ***To install you will need to remove the top plate of your existing transmission crossmember by cutting off the rivets and this will take its place and secured by the nuts and bolts provided***.   If you have any questions about this part please ask.  This will not fit the 2WD crossmember, must be a 4WD crossmember from a W250/W350 and may also be compatible with Ram Chargers as well.  A few have been sold for them and I haven't heard of any issues.  Again please ask questions and I can verify dimensions with you or try to answer any other questions you may have.  This utilizes the original factory bushings for your truck, I usually get them from Rock Auto or you can most likely get them from your local auto parts store.  Pics are for illustration use and gives and idea of what and where the part is used.  Design may vary in the future if needed to improve on part but currently all have been working well with this design.  ONLY THE 2 PARTS IN RED (WITHOUT LOGO) ARE THE ITEMS FOR SALE IN THE PICS PROVIDED.  (Actual crossmember is not included).  Part is CNC cut and bent with a Press brake.  Offers accepted, worse I can do is decline however this is a great design; most importantly:  MADE IN THE USA!  MADE IN TEXAS!!  Support small businesses  

Thanks for looking