Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D
Description
This Hydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform. Tt is equipped with a scale that allows you to accurately read the Bending Angle Within the Range of 0-90°.
Key Features
1) Precise Bending Angle: This product is equipped with a scale within the range of 0-90° that allows you to accurately read the bending angle and bend the metal to the angle you want.
2) Easy to Bend: It has 16T/35273lbs output force, which is very strong and can easily bend different metal materials.
3) Easy to Remove: The pin can be pulled off after bending the metal, and the workpiece can be easily removed without the influence of the metal length.
4) Limit Device: You can adjust the limit device according to the width of the metal material, so that the center of the metal material is aligned with the center of the piston, making it easy to Abend metal materials, such as iron, copper and aluminum plates.
Details
Quick Connector: The connector of this product is a threaded ZG3/8'' quick connector with very tight construction. It can be connected tightly and quickly with the connector on the hydraulic pump.
Dust-proof Cap: There is a dust-proof cap on the quick connector, which can play a very good dustproof effect.
Positioning Device: This product has a positioning device to prevent the metal material from being skewed when bending, making it practical.
Piston Center: It can better hold the metal material to be bent, so it is easier to bend the metal material.
Application
It Is Suitable for Bending Iron, Copper, and Aluminum Plates with a Width of less than 150mm/6 Inch and a Thickness of 3-10mm/0.1-0.3inch.
Specification
Model: CB-150D
Connector Model: ZG 3/8''
Color: Black, Yellow
Material: Iron
Style: Modern
Output Force: 16T/35273lbs
Bending Object: Iron, Copper, Aluminum
Bending Angle: 0-90°
Product Size: 360*240mm/14.1*9.4inch
Gross Weight: 18kg/39.68lbs
Package Size: 19*29*41cm/7.4*11.4*16.1inch
Package Included
1* Hydraulic Busbar Bender
Notes
1. When processing narrow material, please place the material on the auxiliary material holder and adjust it upward to the appropriate height so that the material to be bent will be locked with the cylinder centered.
2. Please center the narrow side material, otherwise, it will lead to jam and damage the hydraulic system.
3. The limit device can be adjusted according to the width of the metal material. The center of the metal is aligned with the center of the piston to bend.
4. It is recommended to use a manual hydraulic pump CP-700 or an electric hydraulic pump DYB-63A. Please prepare them in advance.
5. There is an angle indicator on the product. Please do not bend more than 90°.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
