Portable Air Compressor Pump 12V High Pressure 30MPa/4500psi Auto Stop
Description:
This High-Pressure Air Pump, Without Adding Oil And Circulating Cooling Water, Which Reduces The Trouble Of Connecting The Water Pump And Simplifies The Operation Process. The Built-In High-Power Fan Can Greatly Improve The Cooling Efficiency And Make The Compressor Continuously Fill The Air Gun. Built In Power Adapter And Simple Connection: Built In Power Converter And Compressor. The Rated Power Is 350W. After 25 Minutes Of Continuous Pumping, The Compressor Will Automatically Stop Filling Water To Ensure Safety. Restart After 8 Minutes Of Rest. The Cooling Fan Is Manually Controlled. Adopt Portable Design And Bursting Disc: Portable, Safe And Durable.
Specifications:
Voltage: 110V/ 60Hz
Volume: 30.5*22.5*15cm
Cooling Method: Fan Air Cooled
Compression Mode: 3-Stage Compression
Power Supply: 12V Dc
Power: 350W
Material: Iron And Copper
Motor speed: 2700rpm
Inflation Pressure: 30mpa Or 4500psi
Oil Or Water: Neither Need
Shut Off: Auto-Shutoff
Applications: Suitable For Most Air Guns And Paintball Hpa Tanks
Filling Speed: 0.5L, 0 To 300bars, Needs 20 Minutes Around. 200-300bars, Needs 8 Minutes Around
Product Size: 21.5*17*13cm
Packing Size: 32*27*23cm
Net Weight: 7.3Kg
Gross Weight: 9Kg
Features:
1. There Is No Need To Add Oil And Circulating Cooling Water, Which Reduces The Trouble Of Connecting The Water Pump And Simplifies The Operation Process.
2. The Built-In High-Power Fan Can Greatly Improve The Cooling Efficiency And Make The Compressor Continuously Fill The Air Gun.
3. Built In Power Adapter And Simple Connection: Built In Power Converter And Compressor. The Rated Power Is 350W. After 25 Minutes Of Continuous Pumping, The Compressor Will Automatically Stop Filling Water To Ensure Safety. Restart After 8 Minutes Of Rest. The Cooling Fan Is Manually Controlled.
4. Portable Design And Bursting Disc: Portable, Safe And Durable.
Packing List:
1x Air Pump
1x Filter
1x Jumper
1x Power Cord
1x Instruction Manual
2x Fuses
2x Plugs
5x Shims
5x Safety Tablets
5x Sealing Rings
5x Filter Cotton
First Use Steps:
1 . Check The 110V Ac Voltage Set On The Converter
2 . Connect The Power And Air Hose
3 . Turn On The Cooling Fan
4 . Tighten The Bleed Valve To The Right
5 . Start The Compressor
Notes:
1. The Inflation Pressure Should Be Less Than 30Mpa. Do Not Over-Inflate Your Air Gun .
2. The Duty Cycle Is : Continuous Inflation For 25minutes And Rest For 10 Minutes
3. If The Temperature Reachs 80 Degrees , Please Stop Filling And Keep The Fan Running To Dissipate Heat
4. Tighten The Bleed Valve Before Inflation , Loosen It After Filling Completion To Release The High-Pressure Air In The Hose , And Then Disconnect The Air Gun .
5. Always Turn On The Cooling Fan First And Turn Off Last . Keep The Cooling Fan Running Until The Compressor Cools Below 50℃