Specifications:
Performance
- MAC addresses: 64K
- Switch fabric capacity: 240 Gbps (Full-Duplex)
- Forwarding capacity: 179 Mpps
- Link aggregation: Up to 12 members per group, 24 LAG groups with stack support
- In standalone mode, max 4 members per group and 1 uplink LAG group (Port-channel 128 default mode)
- In stacking mode: max of 12 members per group and 1 uplink LAG group (stacking mode with FN410S and FN410T)
- In PMUX mode: max of 24 LAG groups and multiple uplink LAG groups
- In full-switch mode: max of 24 LAG groups and multiple uplink LAG groups
- Line-rate Layer 2 switching: All protocols, including IPv4
- Line-rate Layer 3 routing* : IPv4 and IPv6
- Packet buffer memory: 4MB
- CPU memory: 2GB
- ACLs ingress egress in full switch mode
Stacking Attributes
- Stacked units: Up to 6 IOAs (using 10GbE ports deployed via CLI)
- Stacking bandwidth: Up to 40Gbps (using 1 x 10GbE ring)
- Stacking topology: Ring and daisy chain
- Virtual Link Trunking (VLT): mVLT and L2 over VLT (deployed via CLI)
- VLT supported in VLT, PMUX and Full-switch mode.
- Stacking supported in stacking, PMUX and Full-switch mode with FN410S and FN410T.
Routing
Layer 3 Routing - full switch mode:
- 1058 RIPv1
- 2453 RIPv2
- 2154 MD5 (OSPF)
- 1587 NSSA (OSPF)
- 2328 OSPFv2
- 2740 OSPFv3
- 4222 Prioritization and congestion avoidance
- 4552 OSPFv3 IPsec authentication
BGP:
- 1997 BGP Communities
- 2385 BGP MD5
- 2439 BGP Route Flap Damping
- 2796 BGP Route Reflection
- 2918 BGP Route Refresh
- 3065 BGP Confederations
- 4360 BGP Extended Communities
- 4893 BGP 4-byte ASN
- 5396 BGP 4-byte ASN representations
- draft-ietf-idr-restart-06 BG P Graceful Restart
- 1195 Routing IPv4 with IS-IS
- 5308 Routing IPv6 with IS-IS
Management
- 1155 SMIv1*
- 1156 Internet MIB*
- 1157 SNMPv1
- 1212 Concise MIB Definitions*
- 1215 SNMP Traps*
- 1493 Bridges MIB*
- 1850 OSPFv2 MIB*
- 1901 Community-based SNMPv2
- 2011 IP MIB*
- 2012 TCP MIB*
- 2013 UDP MIB*
- 2096 IP Forwarding Table MIB*
- 2570 SNMPv3*
- 2571 Management Frameworks*
- 2572 Message Processing and Dispatching*
- 2575 SNMPv3 VACM*
- 2576 Coexistence Between SNMPv1/v2/v3
- 2578 SMIv2*
- 2579 Textual Conventions for SMIv2*
- 2580 Conformance Statements for SMIv2*
- 2618 RADIUS Authentication MIB*
- 2665 Ethernet-like Interfaces MIB*
- 2787 VRRP MIB 2819 RMON MIB (groups 1, 2, 3, 9)*
- 2863 Interfaces MIB*
- 3273 RMON High Capacity MIB*
- 3416 SNMPv2
- 3418 SNMP MIB
- 3434 RMON High Capacity Alarm MIB*
- ANSI/TIA-1057 LLDP-MED MIB*
- IEEE 802.1AB LLDP MIB*
- IEEE 802.1AB LLDP DOT1 MIB*
- IEEE 802.1AB LLDP DOT3 MIB*
- sFlow.org sFlowv5*
- FORCE10-IF-EXTENSION-MIB
- FORCE10-LINKAGG-MIB*
- FORCE10-COPY-CONFIG-MIB*
- FORCE10-MON-MIB*
- FORCE10-PRODUCTS-MIB*
- FORCE10-MS-CHASSIS-MIB*
- FORCE10-SMI FORCE10-SYSTEM-COMPONEN-MIB*
- FORCE10-TC-MIB*
- FORCE10-TRAP-ALARM-MIB*
- FORCE10-FIPSNOOPING-MIB
- FORCE10-DCB-MIB*
- LLDP-EXT-DOT1-DCBX-MIB*
- IEEE8021-PFC-MIB*
- DELLl_ITA.REV_1_1.MIB
- F10-JUMPSTART-MIB*
- FORCE10-MSTP-MIB
- F10-FPSTATS.MIB
- f10-VirtualLinkTrunk.MIB
- F10-DCBX.MIB
- F10-MS-PLATFORM.MIB
*Available with full-switch mode
VLAN
- 802.1Q VLAN tagging
- 802.3ac frame extensions for VLAN tagging
- Native VLAN
- 802.1D Bridging, STP*
- 802.1s MSTP*
- 802.1w RSTP*
- Force10 PVST+*
- 2338 VRRP*
*Available with full-switch mode
Multicast
- 4541 IGMPv1/v2 Snooping
- 1112 IGMPv1*
- 3569 SSM for IPv4*
- 2236 IGMPv2*
- 4541 IGMPv1/v2 Snooping
- 3376 IGMPv3 draft-ietf-pim-sm-v2-new-05 PIM-SM*
*Available with full-switch mode
IEEE Compliance
- 802.1AB LLDP
- 802.1p L2 Prioritization
- 802.3ab Gigabit Ethernet (1000Base-T)
- 802.3ad Link Aggregation with LACP
- 802.3ae 10GbE (10GBase-X)
- 802.3u Fast Ethernet (100Base-TX)
- 802.3x Flow Control
- 802.3z Gigabit Ethernet (1000Base-X)
- ANSI/TIA-1057 LLDP-MED
- MTU 12KB
Environmental
- Power supply: 100–240V AC 50/60Hz
- Max. thermal output: 955.36 BTU/h
- Max. current draw per system: 2A at 100/120V AC, 1A at 200/240V AC
- Max. power consumption: 123 Watts
- ISO 7779 A-weighted sound pressure level: 59.6dBA at 73.4°F (23°C)
- Operating temperature: 32° to 140°F (0° to 60°C)
- Operating humidity: 10 to 85% (RH), non-condensing
- Max. non-operating specifications: Storage temperature: –40° to 158°F (–40° to 70°C)
- Storage humidity: 5 to 95% (RH), non-condensing
- UL/CSA 60950-1, Second Edition
- EN 60950-1, Second Edition
- IEC 60950-1, Second Edition Including all National
- Deviations and Group Differences
- EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User’s Guide Optical Fibre Communication Systems
- FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
- Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
- Canada: ICES-003, Issue-4, Class A
- Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
- Japan: VCCI V3/2009 Class A
- USA: FCC CFR 47 Part 15, Subpart B:2009, Class A
- EN 300 386 V1.4.1:2008 EMC for Network Equipment
- EN 55024: 1998 + A1: 2001 + A2: 2003
- EN 61000-3-2: Harmonic Current Emissions
- EN 61000-3-3: Voltage Fluctuations and Flicker
- EN 61000-4-2: ESD
- EN 61000-4-3: Radiated Immunity
- EN 61000-4-4: EFT
- EN 61000-4-5: Surge
- EN 61000-4-6: Low Frequency Conducted Immunity
- All components are RoHS compliant.