1. Apply only when temperatures are between 10°C and 32°C. 2. Remove dirt, grease, oil and other contaminants. 3. Remove blistered or loose or heavy rust scale with a scraper or mechanical sander. 4. Use of rubber gloves is recommended. 5. Mix or shake well before using. 6. Pour estimated amount needed into a clean container. Material cannot be returned to original container after use. 7. For maximum penetration, work CRC Rust Converter into rusted surfaces with a synthetic bristle brush. For large areas, use a roller or sprayer. 8. Minimum 12 hours cure time before painting. Overcoat with an enamel top coat for best results. If using a water based topcoat use a stain-blocking primer to avoid staining. 9. Clean all painting equipment immediately after use with cold water. 10. Protect CRC Rust Converter from freezing in the container. Store above 5°C.
Ready to Use – No additional mixing or chemical additives required One easy step – Instantly neutralises rust and converts it to an excellent tough black primer Long-lasting – Protects surfaces for years Seals out moisture – Prevents future rusting. Note: Rust Converter may not prevent further rusting when applied to heavy rust scale. Can be applied to damp surfaces No residue to wash off – No clean up Compatible with most standard decorative paint systems for metals.