[EVOLUTION - 18/06/2024 = the engine can now be block on the chassis without using glue, allowing you a perfect fitment !
Le moteur peut se clipser sur le chassis sans utiliser de colle, garantissant un ajustement parfait !
EN / US
Welcome to our store / workshop!
Drawing on our experience as product designers, 3D modelers and prototypists, we offer technical and aesthetic solutions for modelers, miniature worlds and collectors, in 3D printing.
PRESENTATION OF OUR PRODUCT:
Car conversion chassis for Faller car system, Viesmann Car motion, and RC 1/87/HO,
the first innovative general public solution for the personalized manufacturing of Car systems and RC 1/87.
Innovation with variable wheelbase and fixing notches,
allowing any modern automobile body to be attached to 1/87 scale of all brands (Herpa, Rietze, Busch, Wiking, Norev etc.), without modification or deterioration.
With spaces provided for FALLER components and standard electronic components.
A simple, economical, fast, efficient and reliable way for the creation, diversification and maintenance of your car system and RC models.
Innovative solution, designed and tested in intensive conditions.
Great fluidity, flexibility and silence of operation.
Great resistance to shocks.
TECHNICAL SPECIFICITIES:
TWO RANGES: Short frames and long frames.
For each range, THREE VERSIONS. The versions depend on the interior width of the bodywork you want to adapt to the
chassis, as well as the center distance (width between the wheels of the same axle).
V1: width 16mm (for interior body width between 14 and 16mm) - center distance 12mm
V2: width 18mm (for interior body width between 16 and 18mm) - center distance 12mm
V3: width 18mm (for interior body width between 16 and 18mm) - center distance 14mm
Distance between front and rear axle variable: 25.5 to 35.5 mm (short chassis); 29 to 39 mm (long frame)
Possibility to put a standard switch / Faller 8.5 x 4mm SS12D00
Possibility to put a JST 1.25 charging socket or a Faller 3-point connector charging socket
Possibility to put a magnetic switch
Possibility to put a 6mm Faller motor and a 3.5mm pinion module 0.16
Integrated grease tank
Max wheel diameter: 7.5 to 8mm max
Sliding support compatible with Faller directional axles, to be kept in locked position by you.
Holds the bodywork in place on our chassis when you hold it up.
ALL COMPONENTS FIT PERFECTLY IN THEIR LOCATION,
However, we suggest adding a very small amount of superglue (cyanoacrylate) to hold the components in place in their locations (motors, switches, charging sockets).
CONTENT: WHAT YOU RECEIVE
ONE complete chassis printed in 3D (PLA) then assembled by hand, two slide bars, a front axle support.
Included are 4 additional uncut replacement slide bars.
IMPORTANT: FALLER COMPONENTS AND ELECTRONIC COMPONENTS, AS WELL AS WHEELS, INTERIOR AND BODYWORK, ARE NOT PROVIDED.
IMPORTANT NOTES AND WARNINGS:
1/ You will probably have to adjust the lenght of the sliding bars in cutting it. That’s why 4 other sliding bars are provided in replacement.
2/ We regularly test new bodies and changes to our chassis may occur. We also listen to your suggestions and testimonials in order to guarantee the quality of our products and 100% satisfaction.
3/ All our products are checked and tested before being put on sale. However, in the event of an exceptional defect, we invite you to contact us in order to find a repair or improvement solution and/or organize a return.
You have 15 days to withdraw and return the product.
4/ We are at your disposal before and after purchase to advise you best in your production, do not hesitate to ask us questions and contact us in case of doubts.
DELIVERY :
FRANCE
Delivery is free for France by letter followed
OR 6 euros by colissimo
EUROPE:
International tracked letter 6.90 euros
Or colissimo 13.50 euros
WORLD :
International tracked letter 12.5 euros
OR international colissimo 35 euros
Combined shipping provide ! If it is not working, if eBay asked you an immediate paiement, please contact us
Very careful shipping.
Returns possible within 15 days.
WE WILL STUDY YOUR PERSONALIZED REQUESTS AND YOUR SUGGESTIONS, do not hesitate to contact us! :)
MANUFACTURING IS GENERALLY CARRIED OUT AT THE TIME OF ORDER.
Manufacturing and shipping time: 5 to 7 days (we will keep you informed in the event of exceptional additional delays)
Many customers have already trusted us, including the largest railway network in France (Mini World), with 100% satisfaction! :)
FR
Bienvenue sur notre boutique / atelier !
Fort de notre expérience de designer de produits, modeleurs 3D et prototypistes, nous proposons des solutions techniques et esthétiques pour modélistes, mondes miniatures et collectionneurs, en impression 3D.
PRESENTATION DE NOTRE PRODUIT:
Chassis de conversion de voiture pour Faller car system, Viesmann Car motion, et RC 1/87 / HO,
la première solution innovante grand public pour la fabrication personnalisée de Car system et RC 1/87.
Innovation avec empattement variable et encoches de fixation,
permettant de fixer n’importe quelle carrosserie d’automobile moderne au 1/87 toutes marques (Herpa, Rietze, Busch, Wiking, Norev etc), sans modification ni détérioration.
Avec espaces prévus pour les composants FALLER et les composants électroniques standards.
Un moyen simple, économique, rapide, efficace et fiable pour la création, la diversification et la maintenance de vos modèles car system et RC.
Solution innovante, conçue et testée en condition intensive.
Grande fluidité, souplesse et silence de fonctionnement.
Grande résistance aux chocs.
SPECIFICITES TECHNIQUES:
DEUX GAMMES : Chassis courts et chassis longs.
Pour chaque gamme, TROIS VERSIONS. Les versions dépendent de la largeur intérieure de la carrosserie que vous voulez adapter sur le
chassis, ainsi que de l’entraxe (largeur entre les roues d’un même essieu).
V1 : largeur 16mm (pour largeur intérieure de carrosserie comprise entre 14 et 16mm) - entraxe 12mm
V2 : largeur 18mm (pour largeur intérieure de carrosserie comprise entre 16 et 18mm) - entraxe 12mm
V3 : largeur 18mm (pour largeur intérieure de carrosserie comprise entre 16 et 18mm) - entraxe 14mm
Distance entre l’essieu avant et arrière variable: 25.5 à 35.5 mm (chassis court) ; 29 à 39 mm (chassis long)
Possibilité de mettre un interrupteur standards / Faller 8.5 x 4mm SS12D00
Possibilité de mettre une prise de charge JST 1.25 ou une prise de charge connecteur 3 points Faller
Possibilité de mettre un interrupteur magnétique
Possibilité de mettre un moteur Faller 6mm et un pignon 3.5mm module 0.16
Réservoir à graisse intégré
Diamètre de roue max : 7.5 à 8mm max
Support coulissant compatibles avec les essieux directionnels Faller, à maintenir en position bloqué par vos soins.
Maintient en place de la carrosserie sur nos chassis en cas de préhension
TOUS LES COMPOSANTS S’ADAPTENT PARFAITEMENT DANS LEUR EMPLACEMENT,
Nous suggerons cependant l’ajout d’une très petite quantité de superglue (cyanoacrylate) afin de maintenir les composants en place dans leurs emplacement (moteurs, interrupteurs, prises de charge).
CONTENU: CE QUE VOUS RECEVEZ
UN chassis complet imrimé en 3D (PLA) puis monté à la main, de deux barres de glissière, d’un support d’essieu avant.
Sont fournies 4 barres de glissières supplémentaires de remplacement non coupées.
IMPORTANT : LES COMPOSANTS FALLER ET LES COMPOSANTS ELECTRONIQUES, AINSI QUE LES ROUES, L’INTERIEUR ET LES CARROSSERIES, NE SONT PAS FOURNIS.
NOTES IMPORTANTES ET AVERTISSEMENTS:
1/ Vous devrez probablement ajuster la longueur des barres de coulisses en les coupant. C’est pourquoi 4 barres de remplacement non-coupées sont fournies en supplément.
2/ Nous testons régulièrement de nouvelles carrosseries et des évolutions de nos chassis peuvent survenir. Nous sommes par ailleurs à l’écoute de vos suggestions et de vos témoignages afin de vous garantir la qualité de nos produits et une satisfaction à 100% .
3/ Tous nos produits sont vérifiés et testés avant mise en vente. Cependant, en cas de défaut exceptionnel, nous vous invitons à nous contacter afin de trouver une solution de réparation, d’amélioration et / ou organiser un retour.
Vous avez 15 jours pour vous rétracter et retourner le produit.
4/ Nous sommes à votre disposition avant et après achat afin de vous conseiller au mieux dans vos fabrications, n’hésitez pas à nous poser des questions et nous contacter en cas de doutes.
LIVRAISON :
FRANCE
La livraison est gratuite pour la France en lettre suivie
OU 6 euros en colissimo
EUROPE:
Lettre suivie internationale 6,90 euros
Ou colissimo 13,50 euros
MONDE :
Lettre suivie internationale 12,5 euros
OU colissimo international 35 euros
Envoi très soigné.
Retours possibles sous 15 jours.
NOUS ETUDIONS VOS DEMANDES PERSONNALISEES ET VOS SUGGESTIONS, n’hésitez pas à nous contacter ! :)
LA FABRICATION EST GENERALEMENT REALISEE AU MOMENT DE LA COMMANDE.
Délai de fabrication et d’envoi: 5 à 7 jours (nous vous tiendrons informé en cas de délai supplémentaire exceptionnel)
De nombreux clients nous ont déjà fait confiance, notamment le plus grand réseau ferroviaire de France (Mini World), avec 100% de satisfaction ! :)