This is a Jackson Stars brand Dinky that was manufactured and sold in Japan.
It has an alder body with Jackson's signature ultra-thin neck, a nearly flat rosewood fingerboard with 24 jumbo frets, and is the perfect spec for HM/HR.
The pickup is equipped with EMG-HZ.

*After we receive the item, we have cleaned it, replaced the strings, adjusted the rod, adjusted the octave, and adjusted the string height, so it is in good playing condition.

Arm missing.
There are some small scratches and small dents, but it is in relatively good condition.

Product rank: (good quality)
Truss rod: plenty of room
Fret: 60-70%
Accessories: Soft case/non-genuine
Country of manufacture: Japan
Weight: 3.39kg
Serial: 9814618

*The truss rod, remaining frets, string height, etc. are the setting values ​​at the time of setup and adjustment at our repair center.

Product Specifications
Truss rod [No problem] The rod has been checked up to 60 degrees left and right and there is no problem Remaining frets [No problem] There is sufficient fret height String height (Bass string side)Above the 12th fret 2.0mm String height( #40;Treble string side )Above the 12th fret 1.5mm Nut width 43.0mm Neck thickness (near the 1st fret) 19.2mm Neck thickness (near the 12th fret) 21.4mm Scale 648mm (25.5") RADIUS406mm (16") Strings during setup ERNIE BALL 2223 / .009-.042 set Repair/maintenance area cleaning/string replacement/rod adjustment/octave adjustment/string height adjustment