USB and Din MIDI Controller custom with 2 Faders, 2m rubber USB cable and rubber pads/feet
Box dimensions are 95mm x 60mm x 25mm. The fader travel is 60mm.
When a fader is moved the display shows the output CC value. The CC number, MIDI Channel and RANGE of the faders can be changed by using the display and small button located on the top of the box.
There are 5 presets each store the fader cc numbers and range.
These Setting are stored and remembered when powered off. Each Fader can also be set to a different channel allowing control of multiple devices The controller can use both USB and DIN MIDI at the same time allowing you to control DAW software with a fader and a hardware device with another.
The USB Cable is also needed to power the unit when only using the DIN socket and needs to be plugged into a USB port/hub or plug socket (phone charger plug). Can be used to control Ableton Live and other DAW software that allows MIDI learn/mapping, and also any device that uses MIDI CCs (please refer to the manual of your device for the CC numbers). __________________________________________ Quick video demo (copy and paste the link). https://youtu.be/8vsl7Q3b0aQ
Different versions but they work the same
Controlling software (Renoise) and altering range with Arturia Microfreak (copy and paste the link). https://www.youtube.com/channel/UCgWSqQln0fNKMmSzE0zLqbA
Korg Volca Keys and Midi setup
https://youtu.be/HbXW_5Xn4EQ
___________________________________________
HOW TO SET THE CC NUMBER To set the CC# for a fader press and hold the button located on the top of the box, then move the fader to the number of the CC you want it to control. Let go of the button and the display will show 'CC-' then flash the new CC number. Tip: If you find it difficult to stop on the exact number, for example you are trying to stop on 10 but it only changes between 9 and 11 go to 30+ then back down and you should be able to stop on 10.
DISPLAY THE CC NUMBER A FADER IS SET TO AND THE PRESET NUMBER
Press the small button TWO times and keep the button held in on the 2nd press and the display will show “dSp” (display) Now move a fader and the display will show the current set cc number
Then release the button to show the preset number
CHANGE ALL FADER CHANNEL NUMBERS (1-16)
The channel is changed the same way the cc# is changed but you press the small button THREE times and keeping the button held in on the 3rd press and the display will show "CHA" (channel all) now move any knob/fader to the number of the channel you want all the faders to be set to
Then let go of the small button and the display will show "c" and the new channel number
CHANGING THE PRESET (1-5)
Press the small button FOUR times and keep the button held in on the 4th press and the display will show “PrE” (preset) Now move the fader to the preset number you want it set to
Then let go of the small button and the display will show “PrE” then the preset number
CHANGE THE LOW RANGE OF A FADER (0-127)
Press the small button FIVE times and keep the button held in on the 5th press and the display will show "LO" (low)
Now move the knob/fader you want to change the low range of and move it to the number you want it set to
Then let go of the small button and the display will show "LO"and flash the low range of that knob/fader
CHANGE THE HIGH RANGE OF A FADER (0 -127)
Press the small button SIX times and keep the button held in on the 6th press and the display will show "HI" (high)
Now move the knob/fader you want to change the high range of and move it to the number you want it set to
Then let go of the small button and the display will show "HI" and flash the high range of that knob/fader
CHANGE ONE FADER CHANNEL (channel numbers 1-16)
changing just one knob channel is done the same way as all the channels but you press the small button seven times and keep the button held in on the 7th time and the display will show “CHI” (channel Independent) now move the knob to the number of the channel you want the knob to be set to
Then let go of the small button and the display will show “c” and the new channel
Will be posted via Royal Mail.
|