POLARIS(Fujigen) Voyager Black Electric Guitar
Description
Details are unknown due to lack of documentation, but Voyger, an EX type manufactured by POLARIS, which is thought to be Fujigen's export brand in the 1980s, has arrived.The original body shape is a slightly smaller EX shape, with a bolt-on joint and a slim neck typical of the 80's.Equipped with an original tremolo unit in the H-S-H pickup layout, with 1 volume and 2 tone controls.This is an extremely rare model that is rarely seen even used, so if you are looking for a rare guitar, please consider it. There are many scratches and dents scattered throughout, and there are paint chips on the head and the tip of the body.Although there are signs of use, each part has been maintained and cleaned at our repair center and is in good playability. Product Details Truss rod Allows for tightening/loosening Frets Approximately 60% to 70% String height (low string side) 2.0 mm above the 12th fret String height (treble string side) 1.5 mm above the 12th fret Nut width 41.5 mm Neck thickness (near the 1st fret) ) 21.3mm neck thickness (near the 12th fret) 23.8mm scale 648mm (25.5") RADIUS 305mm (12") Strings at setup ERNIE BALL 2223 / .009-.042 set- - Year of manufacture 1980s Country of manufacture Japan case Soft case /Non-genuine accessories Arm serial number Unknown Weight 3.68kg- -Product rank: Some scratches, but no problem for normal use Repair/maintenance areas Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment changes -*The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.