USB MIDI Controller with 4 faders 4  knobs  Joystick DIN MIDI out ,2m USB cable

Box dimensions are 170mm x 120 mm x 35mm

Fader travel/throw is 60mm

The knobs are potentiometers and are the version that stop
(only turn 270 degrees 7 to 5 o’clock)

Can be used to control Ableton Live and other DAW software that allows MIDI learn/mapping and also any device that uses MIDI CCs (please refer to the manual of your device for the CC numbers).

The USB cable is needed to power the controller when using only DIN MIDI and needs to be plugged into a USB port/hub or plug socket (phone charger plug).

When a Fader/knob or joystick is moved the display shows the output CC value. The CC number, MIDI Channel and RANGE of the knobs can be changed by using the display and small button located on the top of the box.

The joystick up/down direction can be set to a CC number
and the left /right direction can be set to a CC number

The joystick is self centring

(RETURNS TO THE MIDDLE)

Each fader/knob and joystick can also be set to a different channel allowing control of multiple devices

These Setting are stored and remembered when powered off.

HOW TO SET THE CC NUMBER

To set the CC# for a fader/knob press and hold the button located on the top of the box, then move the knob to the number of the CC you want it to control.  Let go of the button and the display will show 'CC-' then flash the new CC number.

Tip: If you find it difficult to stop on the exact number, for example you are trying to stop on 10 but it only changes between 9 and 11 go to 30+ then back down and you should be able to stop on 10

 When setting the joystick cc move the stick to the centre before pressing the button and try to move the stick in a straight line in the direction you want want to change the cc

DISPLAY THE CC NUMBER A FADER/KNOB IS SET TO AND CHANNEL

Press the small button TWO times and keep the button held in on the 2nd press and the display will show “dSp” (display) Now move a knob and the display will show the current set cc number
Then release the button to show channel number

CHANGE ALL FADER/KNOB CHANNEL NUMBERS (1-16)

The channel is changed the same way the cc# is changed but you press the small button THREE times and keeping the button held in on the 3rd press and the display will show “CHA” (channel all) now move any knob to the number of the channel you want all the knobs to be set to
Then let go of the small button and the display will show “c” and the new channel number


CHANGE ONE FADER/KNOB CHANNEL (channel numbers 1-16)

changing just one fader/knob channel is done the same way as all the channels but you press the small button four times and keep the button held in on the 4th time  and the display will show “CHI” (channel Independent) now move the knob to the number of the channel you want the knob to be set to
Then let go of the small button and the display will show “c” and the new channel number of only that knob

CHANGE THE LOW RANGE OF A FADER/KNOB (0-127)
Press the small button FIVE times and keep the button held in on the 5th press and the display will show “LO” (low)
Now move the knob you want to change the low range of and move it to the number you want it set to
Then let go of the small button and the display will show “LO” and flash the low range of that knob/knob

CHANGE THE HIGH RANGE OF A FADER/KNOB (0 -127)
Press the small button SIX times and keep the button held in on the 6th press and the display will show “HI” (high)
Now move the knob you want to change the high range of and move it to the number you want it set to
Then let go of the small button and the display will show “HI” and flash the high range of that knob