Feature:
    【SHOWER HEAD COMBO】: The combination of 8’’ Large Square rain shower head and high pressure handheld shower head allows you to choose different bath experiences at any time. Suitable for both adults and your babies.This showerhead set solves all the problems for you
    【8’’ LARGE RAIN SHOWERHEAD】: 8’’ Large Square Rainfall Showerhead , waterfall full body coverage, more than 100 closely grouped self-clean silicone nozzles provide even spray and prevent lime and hard water build up. 360 rotation angle-adjustable solid ball joint nut for reliable leak-free connection and different angle position shower needs. Come with filter and washer insure reliable leak-proof connection
    【5 SETTING HANDHELD SHOWERHEAD】: 5 Modes setting is suitable for baby shower, massage or pets shower, etc. The water regulator is helpful for adjusting water pressure - It controls the water flow, especially when using hot water
    【ADJUSTABLE EXTENSION ARM】: 11’’ Shower Head Arm. Made from solid and durable brass. Not worry about breaking or leaking. Allows you to adjust the showerhead for best angle and height
22
34 

Step 1: Make sure the gasket is inside the connection port and use sealing tape around the pipe thread adapter.

Step2: Attach 3-way diverter to shower arm by rotating the bolt clockwise by hand.

Step3: Attach extension arm to 3-way diverter. Ensures use hexagon wrench to tighten free spinning locking collar.

Step4: Attach rain shower head to extension arm.

Step5: Attach shower hose to 3-way diverter and water flow regulator.

Step6: Attach water flow regulator to shower hose.

Step7: Stick the bracket to the wall.

Note: To fit the parts more tightly, a wrench is required to assist in tightening each connector.

 

 

223

55

244

23

11’’ Extension Shower Head Arm

1.180 degree adjustable: free to choose the best height for shower.

2.Gear Joint : Hand the square rainfall shower head tightly and safety

3.spinning locking collar: Easy to install and will not hart hand

5FT Stainless Steel Hose

1.Lightweight, flexible and no tangle

2.Comes complete with washers and is easy to install with hand tight.

3.The round port is connected to the hand shower, and the hexagonal port is connected to the tee

installation assistance tool

1. Use a wrench to tighten each connection port to help prevent leaks

2. Use with the sealing tape included in the kit

3. Note: The wrench is not included in the picture

Shower bracket installation

1. Dry the water stains and tear off the tape behind the stand

2. Paste in the appropriate position, do not change the position after pasting

3. Put into use 24 hours after pasting