2024 Ver. LAUNCH X431 PRO DYNO diagnostic scanner has NO IP Limitation, works with global 150+ brands & 200,000+ models, and widely suits for repair shops, technicians, advanced DIYers, large-scale garages, car dealers, home repair, etc. Functions as LAUNCH X431 Torque III /THROTTLE /V+ /PROS V, LAUNCH X431 PRO DYNO features advantageous diagnostic software and high-end hardware to maximize your repair business and work efficiency.
LAUNCH scanner X431 PRO DYNO has a newly updated DBScar VII VCI device that directly works on CAN FD & DoIP communication (DoIP needs to purchase an extra testing adapter.). Compared to traditional BT connectors, DBScar VII VCI supports USB connection and wireless BT dual communication to achieve more stable, safer, and more effective data transmission.
CAN FD: CAN FD with a flexible data rate overcomes the limitations of the classical CAN bus in terms of data transfer rate. The application of CAN FD protocol achieves 6x faster data transmission of the LAUNCH scanner. CANFD Connector makes your Launch X431 PRO DYNO work with a wider range of vehicle models: post-2019 GM models. (Users don’t need to separately buy a CAN FD adapter.)
DoIP: LAUNCH DBScar VII VCI is compatible with the DoIP protocol. DoIP can save the cost and the effort of integrating the DoIP protocol stack in every electronic control unit for cars separately. The protocol applies to post-2018 Volvo, post-2017 Land Rover, and Jaguar, and supports BMW F and G chassis models. (DoIP needs to purchase an extra testing adapter.)
LAUNCH X431 PRO DYNO: Global Vehicle Coverage, 150+ Brands & 200,000 Models
As you can see, more and more vehicle problems are caused by ECU modules. Modern auto repair shops need to do high-level repairs such as replacing the ECUs, activating new ECU modules, matching newly replaced components, reprogramming the adaptive data, activating new ECUs, etc. Once holding a LAUNCH X431 PRO DYNO, 99% of ECU coding problems can be easily solved.
More High-end Functions Do Great Helps for Modern Vehicle Repair & Maintenance
LAUNCH X431 PRO DYNO diagnostic scanner performs comprehensive diagnostics without speeding too much time. After completing a full set of diagnostic process, 99% of the fault codes can be captured, useful repair techniques can be obtained until the fault codes are easily cleared. LAUNCH scan tool can retrieve ECU information, read DTCs, show live data, and clear DTCs for all available ECUs:
LAUNCH X431 PRO DYNO: Bi-directional Control Takes Minutes to Locate The Problems
Even experienced repair masters may not be able to accurately diagnose some complex problems solely based on their experience. In such cases, if they have the support of a LAUNCH automotive scanner, they can easily pinpoint the cause of the malfunction.
Working as a bi-directional scan tool, LAUNCH X431 PRO DYNO features various active tests that can send commands to check whether the vehicle system is in good condition or not. Bi-directional control brings users an effective way to locate vehicle problems, which can work on most ECUs such as windows, doors, wipers, headlamps, rear lights, actuators, pumps, valves, etc.
Staying ahead of issues with LAUNCH innovative maintenance functions. Updates of LAUNCH X431 Torque III /THROTTLE /V+ /PROS V, LAUNCH X431 PRO DYNO car scanner gathers 37+ reset functions to complete common reset / learning / matching after replacing a new module or changing some components. Working on 99% of main car models made from 1996 to date, LAUNCH car scan tool also provides more specific functions that you want by accessing (Car Brand - Car System - Car Module - Ser.vice Function).
Oil Reset: Reset the oil life system and turn off the oil light to start a new cycle.
Throttle Matching: Cycle the motorized throttle body through various states (idle, part throttle, WOT) to relearn their positions.
SAS Reset: Reset the steering angle to zero to keep the car running straight.
Brake Reset: Empty the air after changing the brake pad, brake pad sensor, brake pump, ABS pump, etc.
TPMS Reset (Indirect): Reset tire pressure and turn off the TPMS light after replacement.
IMMO Reset (Basic): Disable/de~lete/match k~eys.
ABS Bleeding: Bleed the air of a brake system to restore ABS brake sensitivity.
Battery Matching: Re-match the battery control module and motoring sensor.
Injector Coding: Code the injector after replacing or adjusting it to correct the injection volume of each cylinder more accurately.
Headlamp Reset: Initialize the adaptive headlamp system.
EPB Reset: Reset the calipers, brake discs or pads after replacing the electronic parking brake system.
Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
Windows Calibration: Perform door window matching to recover ECU original mode.
Note: 1) Available functions vary by model, make, year, etc. You can check the compatibility by messaging us. 2) LAUNCH team is continuously developing more repair functions.
Devoted to comprehensive diagnostics and multidimensional deep inspections, LAUNCH X431 PRO DYNO diagnostic scan tool Not ONLY does better in Maintenance Functions & ECU Coding But Also make great achievement in add-on functions: Battery Tester (BST360), Videoscope (VSP600), IMMO Programmer (X-PROG3), Scopebox, Sensorbox, Multimeter, ADAS, WiFi Printer, etc.
Note: All the above extended tools are sold separately. If you want to get them, please message us or purchase them in LaunchDirect Store.
Powerful Information Center: Same as Snap-on tools, LAUNCH X431 PRO DYNO invests great development in integrating repair information to help global users obtain valuable diagnostic information, thereby reducing the repair difficulty and time spent. Include Operation Tips, DTC Help, Technology Handbook, Product Manual, FAQ, etc.
Remote Diagnostics: Unlike other brand scanners that ONLY allow remote Team Viewer, LAUNCH X431 PRO DYNO empowers the LAUNCH scanner to remotely work with LAUNCH tools or computers and operate real-time vehicle diagnostics. Make the exchange of repair experience & assistance a reality thousands of miles away.
8-in-1 Data Stream: LAUNCH X431 PRO DYNO diagnostic scan tool can display 8-in-1 live data in a graph to help mechanics intuitively monitor vehicle status and accurately analyze / diagnose vehicle problems.
Intelligent Software Updating: One-click WiFi updating all user software, vehicle software, connector firmware, etc. LAUNCH X431 PRO DYNO provides 2-Year No-Fee Updates and Intelligent Updating that can automatically filter frequently-used software based on user usage patterns to provide priority upgrades.
Diagnostic Feedback: When encountering incompatible vehicle models or abnormal diagnostic functions, you can submit your feedback & advice to the LAUNCH team via “Diagnostic Feedback”. LAUNCH will arrange specialized technicians to dealwith these problems timely.
Diagnostic Report: LAUNCH X431 PRO DYNO automotive scanner can automatically record every diagnostic process to facilitate later check & analysis that can help quickly locate vehicle problems. And you can print all the diagnostic reports and share them with your customers.
Global Vehicle Coverage: LAUNCH X431 PRO DYNO scan tool has a leading vehicle coverage among global aftermarkets, serving 150+ brands & 200,000 vehicle models.
No-Risk Purchase: LAUNCH X431 PRO DYNO provides 5-Year Quality Undertaking, 7*24 Online Response, Lifetime Tech Instruction, etc.