Carbon Film Underfloor Heating, Wood & Laminate Kits
Underfloor Heating Film with Digital Thermostat & Free Next Day Delivery
Underfloor Heating Film Kits designed for use as either the Primary Heat source, (no radiators required) or just for floor warming. At 200 watts per m2 it is suitable for all rooms under wood & laminate and is ideal for high heat loss areas including conservatories without the need of additional heating.
Please note: Heat film mats are a bespoke product and we will need mat sizes or a dimensional drawing from you as with out this we will not be able to process your order please see below for more details.
Under Laminate Heating System
Under laminate heating or electric underfloor Heating 200w/m2 heat film kits. Designed for heating under wood, laminate and floors. Due to its ultra-even heat distribution it is ideal as a primary heat source in your room. Laid directly under wood or laminate floors with our impact plus insulation, which bounces the heat up into your room. The film mats can also be laid under vinyl floors. With an additional layer of our duo overlay. The impact plus insulation and duo overlay can be purchased from our shop.
Under Laminate Heating Film Mats
Underfloor heating film mats are a bespoke product that is custom made to fit your room. Hence the room or mat dimensions are always required to complete your order. We offer a free design service to help you in this process if needed. Simply email us a rough dimensional sketch of your room and state what floor covering you will be laying and we can do the rest. However, if you would like to plan out your underfloor heating system yourself. The Film mats are available in two widthss 0.5m and 0.4m wide and can be cut every 250mm increments in length.
The 200w/m2 heat film comes with a 15-year guarantee and has no moving parts, so once installed can be left to its own devices. If you would like a free no obligation please feel free to get in contact with us on 01803 316060.
Things to know about this product
Our heat film comes in 0.5m and 0.4 widths, which we then cut to your required length in 250mm increments to suit your floor. Please email or fax a rough dimensional drawing of your floor area (wall to wall internal measurements) and we can work out a floor plan illustrating how the mats will be situated for you to confirm.
Please note to use this heating effectively and efficiently you will require our Impact Plus thermal insulation or (Soft Insulation) for use under this heating. You will also require sufficient insulation to cover your total floor area not just your heated floor area so that you maintain an even floor, for your floor covering.
When installing this heating under vinyl, the vinyl must be suitable and not rubber backed. And our duo overlay layer will replace your underlay ready for the vinyl to be fitted over.
This heating is very easy to fit with no experience or specialist tools required, however the heating must be wired through an RCD and the final connections must be carried out by a qualified electrician. For areas over 3600 watts a relay switch /contactor may have to be incorporated to carry loads over over 16amps.
When you buy this kit you receive |
---|
Underfloor Heating System |
Programmable thermostat |
Floor Probe included with Thermostat |
High adhesion fixing tape |
Vapour Barrier |
15 Year warranty on heating system |
Full fitting instructions |
Technical Free Phone Help Line |
FREE Next working day delivery service |
Technical Information |
---|
200W Carbon film heating element |
Less than 1mm thick |
Suitable for under wood and laminate floors |
Living Heat Thermostats
Fit into a standard 1 gang back box. And can carry a maximum load of 16amps. After this threshold is passed a simple contact or relay switch must be installed.
T5 Touch Screen Thermostat
Underfloor Heating Controller & Free Next Day Delivery
The T5 touch screen digital thermostat will operate all standard electric underfloor heating systems.
With a large sensitive, ultra flat low profile screen with micro bevel edges the T5 is a stunning looking thermostat.
Its intuitive and easy to use layout makes this thermostat super easy to use and once programmed it can automate your heating to suit your lifestyle letting you sit back and just relax.
- ✓ A blue LED touch screen back light for easy viewing
- ✓ A low profile design
- ✓ Fits a standard 1 gang electrical wall box
- ✓ A 1-Year manufacturer's warranty
- ✓ Free Phone Help Line 0800 634 2737 / 01803 316060
CT1000 Colour Touch Screen Thermostats
Underfloor Heating Controller & Free Next Day Delivery
The NEW CT1000 Colour Touch Screen thermostat combines the very latest in smart heating features of a modern digital thermostat with a large 4.4" Colour Touch Screen and super stylish look! With a bespoke screen design, this thermostat will add a modern stylish look to any room.
- ✓ The CT1000 Thermostat has 6 Timed Events per day and 7-day programmable cycle
- ✓ Has comfort, economy, party and holiday power settings
- ✓ A manual over ride facility
- ✓ Has both air and floor temperature sensors
- ✓ An attractive colour touch screen for easy viewing
- ✓ A low profile design
- ✓ Fits a standard 1 gang electrical wall box
- ✓ Has an extendable 3-15m floor probe
- ✓ A 1-Year manufacturer's warranty
- ✓ Free Phone Help Line 0800 634 2737 / 01803 316060
How to Install underfloor heating carbon film mats
Under Wood & Laminate a Fitting Instructions for carbon film Underfloor Heating Systems.
Floor Preparation / Laying of Insulation
The concrete or wood sub floor should be stable, clean and suitable for the desired floor covering, prior to any underfloor heating being installed. Once the floor is prepared, start by rolling your insulation out over the sub floor making sure to cover the total floor area where the wood, laminate or vinyl floor covering is to be laid including unheated areas. A contact spray adhesive can be used or a double sided tape to hold the insulation in place if required but is not a necessity. The diagram to the left shows the soft insulation being installed with the floor sensor / probe fixed in place.
Floor Sensor Installation
Once you have decided on the mat layout within your room you will first need to install the floor sensor supplied with your thermostat. Cut a small channel into the insulation layer to allow the floor sensor / probe to be laid into. The channel should be located under a heated area, (heat mat to be laid over this channel in next stage).
Laying Underfloor Heating World (Living Heat) film mats
If you have requested a proposed mat layout from Living Heat you can simply hand this to the installer or follow the plan yourself. Make sure you unroll and identify each mat, Start at one side of the room rolling the mats out in a structured way making sure not to overlap any mats at any point. Each mat can be held in place by using a suitable adhesion tape such as gaffa tape along the ends and side of the mats.
Once the mats have been laid and fixed in place the connection tails should be run back to the thermostat / junction box location. The connection ends and cold tails can be pressed into the insulation by scoring the insulation and firmly pressing the tails / ends into the scored insulation. It is advisable to tape over the connection tails and cold ends to keep them held in place during the instillation of your wood / laminate floor. The diagram below shows the two ways mats can be connected beck to the thermostat. (Mats must always be connected in parallel never in series).
Floor Sensor Installation
Once the Living Heat mats have been laid and fixed in place the vapour barrier is ready to be laid over the top of all the under floor heating mats. The vapour barrier, (Supplied free with all heating mats), must fully cover all under floor heating mats, (it is not a necessity to cover the whole floor area only the actual heat mats themselves). If necessary the vapour barrier can be taped around the edges to hold it in place.
Living Heat heat film is designed for use directly under all wood and laminate floors, (vinyl must be good quality and not rubber backed). Please note it is advisable to regulate the floor temperature using the floor probe with the thermostat set to floor only. This is because all wood & laminate floors have different max permitable temperatures and thus the flooring supplier should be consulted first to confirm the max permitable floor temperature the heating can be set to. This tends to be approximately 28oc for most wood & laminate floors.
Important Please Note!
- A qualified electrician should be used to make the final connections to the mains power
- This heating is not suitable for wet areas such as bathrooms / wet rooms
- For delivery outside the UK please contact us for delivery costs before you place your order