High Strength silicone mould making rubber. Our Silicone has been formulated for easy mixing by hand, with colour coded components giving a visual aid to ensure mixing is adequate. The two components mix easily and because of the low viscosity most grades can be used without processing in a vacuum chamber. This silicone is suited for the detailed reproduction of figures, art objects and similar items.

Features :

Outstanding release properties
High Flowabilty and long working time
Medium Hardness
High tear resistance
High elasticity for easy removal of complex replica parts
Can be made thixo tropic (non flowable) for vertical surface replication (Silicone Thixo Required)

Mix Ratio : 100:10 (10:1)
Working Time : 40-60 Minutes
De-Mould Time : 12-24 Hours
Mixed Viscosity mPas : 18000
Hardness Shore A : 27
Tensile Strength Mpa : 3.0
Elongation @ Break % : 520
Tear Strength kN/m : 23
Linear Shrinkage & : 0.2-0.4
All Available Kit Size's: (Mixing Stick Included)
275g kit = 250g Silicone - 25g Catalyst
550g kit = 500g Silicone - 50g Catalyst
1.1kg kit = 1000g Silicone - 100g Catalyst
2.2kg kit = 2 x 1000g Silicone - 2x 100g Catalyst
5.5kg kit = 5kg Silicone - 500g Catalyst
11kg kit = 2 x 5kg Silicone - 2 x 500g Catalyst
22kg kit = 20kg Silicone - 2kg Catalyst

250g of Silicone will fill approximately 200ml by volume. Instructions & datasheet downloads available under documentation. Please note this silicone is not suitable for food use. It is also not suitable for direct use on skin.

Base and catalyst use universal containers for various kit sizes and are supplied by weight, while the supplied containers may not be full, they will contain the correct amount of both base and hardener according to the listing. At point of packaging and dispatch lids may be taped to prevent damage or spillage during transportation.