The HubDoctor® Pro FULL HYBRID CERAMIC Ball Bearing Conversion Kit for Mavic® Freehubs ~ MTB and Road 2013 and Up Only.
Get rid of the plastic bushing once and for all! Runs quieter too! Fits
seamlessly into your hub, no special spacers required; looks identical from the
outside. (The freehub bearings only spin when you are coasting). Don't replace
your worn out hub (see last picture) - rebuild it - with HubDoctor® PRO!
Convert
your Mavic® Shimano or Campy Freehub to a
full CERAMIC ball bearing system. Please note the photos of both
of these hub types in pictures. The freehub is not included; this kit
upgrades your freehub whether it is a Campy or Shimano type.
The New HubDoctor® PRO kit features a dual sealed Hybrid Ceramic ball bearing with a full complement of 56 Si3N4 balls.
****The ultimate upgrade for Mavic® MTB or Road wheels using the FTS-L and FTS-X freehubs! Weighs only 12 grams!****
Fits Mavic® ROAD and MTB wheels with plastic inner bushing: Ksyrium, Aksium, Cosmic, Helium, Crossmax SL-Enduro-XL- SLR-ST-29-SX-UB, Deetraks, Deemax, Crossland, Crossland, Crosstrail, Crossride UB, R-SYS, Cosmic Carbon SL, Comet Route, Speedcity with FTS-L and FTS-X hubs (42.50mm or 1.67" long), 2013 and up ONLY. Note: Does not fit ITS 4 freehubs.
Note: For 2012 and earlier click here for our NEW! HUBDOCTOR PRO MAVIC FREEHUB REBUILD KIT HYBRID CERAMIC BEARINGS! listing.
Kit
contents: inner hybrid ceramic ball bearing and outer ball bearing (Si3N4), 6061-T6 aluminum freehub
adapter, 1 outer seal, 1 inner seal, 1 inner spacer, 1 sanding tool and
sand paper, detailed instructions to walk you through installation.
Please note: A new seal has been designed for 09 Crossmax SLR, ST, 29SS,
R-SYS and others using this style design. From the non-drive side of the hub
you will see a "keyhole" design where the spoke ends fits into. The
external lip seal can be removed in these applications. The bottom line is that
the kit will fit any of the Mavic freehubs using the plastic bushing and two
pawl design.
What our customers are saying about our
HubDoctor® Pro Kit:
The inner bearing spacer is included. A special light contact outer lip seal keeps out dirt and water. An Extra adapter seal is included in the kit.
If you have a worn out hub journal, (see last picture), our new The HubDoctor® Pro kit will save you the cost of replacing the main hub since the new inner bearing sits behind the standard bushing journal on an unworn surface!
Did you know the Mavic® freehub body shell is made of hardened steel and is practically indestructible! What wears out is the bushing and then you have to replace the entire hub and you’re stuck with an expensive paperweight! The new The HubDoctor® Pro Ball Bearing kit will fix and upgrade your wheel set for less than the cost of a new freehub! And with this new hybrid ball bearing kit you can eliminate replacing the bushings and a source of wear on your hub.
Installation is similar to tapping
or pressing in a headset and can be done in 30 minutes. Included with
your kit are step-by-step installation instructions that walk you
through every step, so it makes it easy to service your own freehub!
Shipping is free in the USA! We ship World Wide! We ship Daily!
Please Note: Photo 5 shows the bearing with the
outer seal removed for illustration purposes only. This kit does not contain the freehub body or assembly,
but is shown for demonstration purposes only.
The HubDoctor® Pro
Mavic® Cassette Hub Overhaul Kits
The cost-saving solution for rebuilding Mavic® cassette
hubs.
Check out our other items.