Full Set Corvette C4 Coupe (1984 – 96)
Roof Panel Bracket Bolts
Grade 18-8 Stainless Steel
The Targa roof bracket mounts on C4
Corvettes are held in place with two Torx head screws on each each corner of the panel. Over the years these bolts can rust or loosen up and fall out. If you
are driving around with one or more missing or stripped roof bolts it is only a
matter of time until you have a bigger problem. Replace them now while you can
still afford it.
These fasteners are available from several big name Corvette
supplies. However, the price for the exact replacement black oxide pieces is
quite high. You can buy a complete set of 8 stainless steel bolts/screws from
us for less than just two or three bolts elsewhere.
Our fasteners are made of
stainless steel which eliminates rust forever. This trumps the inexpensive black
machine screws that were used during factory assembly. Also, our heads are the
very attractive “Socket Button Head” style with Allen (Hex) sockets. We feel
that this head is a much better looking fastener than the original, not so
attractive, Torx style head which was intended for one time only robotic
assembly. The original bolts did not have washers, but we at Righty_Tighty like to use washers on just about everything. A set of 8 stainless steel flat metric washers is included in this kit.
_________________________________________________________
NOTE: When you install these bolts
use the slightly longer bolts on the front
and the shorter ones on the rear.
_________________________________________________________
One payment of $14.00 buys 2 bolts, 4 washers and 2 nuts …
USPS First Class shipping with Tracking
is
$3.96
TOTAL or 1, 2, 3 or more packs.
(No
matter how many packs you buy, the shipping charge remains at $3.96)
_________________________________________________________