Description

This is one of our latest models, where the monitor powers up the camera down an all in one cable. 

This particular system uses the 7" Mirror mounted monitor with the white 1/3" Sony 811 700TVL CCD image sensor Bracket Camera. 

The camera has a stainless steel bracket, which is shown to last a very long time without corrosion unlike mild steel we have seen from most other retailers, which tends to rust in a matter of a few months.

The monitor uses a Hi-Res digital panel screen with more than 3 times the amount of pixels of the standard screens most other retailers sell.   (Please note some sellers multiply the first number by 3 for RGB, if we were to do that it sounds even more impressive (2400x480).  We prefer to keep it simple but check carefully our competitors, the last number is normally better to go by as this is the number of lines of pixels.

Our systems work on either 12V or 24V, no switches it will adjust to the voltage automatically.  We have supplied lots of these to HGV owners. 

We supply with a 2 year Guarantee with us, meaning we will arrange any non-user damaged parts that are deemed faulty.

Dimensions

Technical Specs

Monitor

Display size : 7" Diagonally Measured
Power Consumption : 7.5W
Power : 12V-24V
TV System : PAL/NTSC (Auto detect)
Resolution : 800(w)*RGB*480(H)
Video Input : Dual Video Inputs.  Blue screen when no signal input.

Camera

Image Device:1/3 SONY 811 700TVL CCD
TV System: PAL
Effective Pixels: 976*582
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR leds on)
Video Output:1.0vp-p,75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/50Sec-12.5μSec (PAL) / 1/60Sec-12μSec (NTSC)
BLC: Auto
Current Consumption:100mA
Waterproof to Ip68
18 Infra red LEDs to provide night view
Waterproof with adjustable shade to prevent glare from sun
Mirror image only
Stainless Steel Bracket (painted)