Feature:
Input voltage: 5V-24V
Dimensions: 6.30 in x
2.95 in x 0.91 in (16.0
cm x 7.5 cm x 2.3 cm)
Weight: 230 g
Number of programs: 16
MAX
MAX number of pixels:
2048
Compatible with single
line or double line
chips.
32—256 Gray, Support
software Gamma
correction.
Support the rules and
special-shaped handle.
Single-port output, can
support 2048 lights.
Off-line(SD Card)
control, play back
content stored in the SD
card.
T-1000S store a maximum
of 16 programs, copy
multiple files to the SD
card in order after
formatting the SD card
as "FAT" format.
The program must be
named in orders . Ex. :
00_1.led, 01_1.led,
02_1.led.
NOTE:
1. When T-1000S
controller less than 512
pixels the frame rate
can reach 30fps. When
T-1000S control more
than 512 pixels the
frame rate will slow
down automatically.
2. T-1000S must use the
new software Led Edit
2012.
Support chips:
Definition of
buttons:
NOTE:
For the TTL(SPI) signal,
the controller signal
ground must connect to
the LED ground directly.
Mode of
connection
1.Multiple T-1000S
controllers can be
cascaded together and
work synchronous.
2.T-1000S one TTL(SPI)
signal and one RS485
signal port output,can
control 2048 pixels;
3.When the chip for LED
is single line chip just
with data, then just
need to be connected
with DAT and GND of the
controller. If the chip
for LED is double line
chip with DAT and CLK,
then need to be
connected with DAT, CLK,
and GND of the
controller.
4.If you need to use
RS485 signal you need to
connect controller A
with LED A (DMX+),
controller B with LED
B(DMX-),
|