500mm (w) x 800mm (h) Ellipse Chrome Heated Towel Rail Radiator Warmer 1856 BTUs

500mm (w) x 800mm (h) Ellipse Chrome Heated Towel Rail Radiator Warmer 1856 BTUs

$255.00

Technical Specification

Width (mm): 500mm
Height (mm): 800mm
Outer Finish: Sparkling Chrome Plating
Base Material: Mild Steel
Guarantee: 10 Years
Output (BTUs): 1856
Output (Watts): 544
Pipe Centers (mm): 455mm
Projection from Wall (mm): 100-130mm (adjustable brackets)
Bar Pattern: 4 + 11
Accessories: Includes Fixing Kit, Wall Brackets, Bleed Valve & Blank Plug
See Description For more information.

Description

500mm(w) x 800mm(h) Ellipse Chrome Designer Bathroom Heated Towel Rail. The eliptical tubes and subtle curved projection are a perfect design for drying towels and the robust chrome plating provides a High BTU Output. This listing is for the towel rail and fixing kit only and can be installed on your central heating, as electric only or as a dual fuel setup when fitted with the correct accessories.
An NWT Designer Chrome Towel Rail is the perfect upgrade from a standard ladder rail design which still combines functionality with aesthetics. The robust sparkling chrome plating creates a unique focal point of your bathroom or ensuite installation.
 
Our range of Ellipse Designer Towel Rails have been manufactured with stylish, curved horizontal bars (30mm x 15mm) for increased surface area and improved heat outputs. The towel rail is supplied with bleed valve and blank plug and also a four point fixing kit which allows adjustment in the projection from the wall of 100mm to 130mm.
 
Our Ellipse towel rails are available in the following sizes:
 
500mm(w) x 1100mm(h) Ellipse Black - 2917 BTUs
600mm(w) x 800mm(h) Ellipse Black - 2667 BTUs
 
500mm(w) x 800mm(h) Ellipse Chrome - 1856 BTUs
500mm(w) x 1100mm(h) Ellipse Chrome - 2497 BTUs
600mm(w) x 800mm(h) Ellipse Chrome - 2227 BTUs
600mm(w) x 1100mm(h) Ellipse Chrome - 2930 BTUs
600mm(w) x 1400mm(h) Ellipse Chrome - 3428 BTUs 
 

Installation:
Our range of heated towel rails can be installed in 3 different ways:

1. On your central heating system.
You will need a suitable pair or valves. We recommend using a pair of Angled or Corner Valves When you pipework is coming from the wall or a pair of straight valves when you pipework is coming up from the floor.
Please see: NWT Valve Multilisting

2. As a stand alone electric towel rail.
You will need:
- a suitable electric heating element either standard fixed temperature or manually controlled thermostatic. 
- x1 additional blank plug.
- the towel rail to be pre-filled .
Please see: NWT Electric Heating Element Multilisting
                   NWT Electric Preparation

3. As a dual fuel towel rail.
You will need:
- a suitable dual fuel valve kit (includes valve kit and electric element - pipework coming from the wall)
Please see: NWT Dual Fuel Valve Kits