under tile floor heating kit + lifetime warranty the perfect electric underfloor heating
underfloor heating for under tile & stone / all floor coverings
150W/m2 Kit With, Thermostat Options & Free Fast Delivery- Low Profile Under Tile Mat - Only 3mm In Thickness
- Can Be Used As A Secondary Or Primary Heat Source
- Suitable For Domestic Or Commercial Installs
- Perfect For New Builds Or As A Retro Fit
- IPX7 Waterproof Rating
- Can Be Be Installed Under Most Flooring - Not Just Tiles
- We Offer The Largest 150w in The UK At 16sqm
- Enhanced With XPS Or Cement Coated Tile Backer Boards
- Should Be Embedded In A Flexible Tile Adhesive Or Self Levelling
- Free Technical Assistance
- After Sales Support
- Lifetime Guarantee
The Living Heat Underfloor Heating Mat 150w/m2 can be installed beneath most floor types (not just Tiles). They are suitable to be used as a secondary or primary heat source under Tiles, LVT, Karndean or Carpet.
We offer a wide range of mat sizes and loose wire cables. Our largest 150w mat is available at 16sqm, which is supplied as a continuous mat - 0.5m in width x 32m in length - The largest heat mat in the UK.
They also have an IPX7 Waterproof rating, making them safe for any room and installation. The heat mats can be laid directly onto a solid wood or insulated concrete subfloor.
However, to aid efficiency and the response of the heating kit, it is highly recommended insulation be installed, prior to the underfloor heating being laid.
You may also require
When you buy this kit you receive
- This high-quality ETFE advanced insulation system is made with the highest quality Fluoropolymer.
- Our systems are ultra-thin making our cables one of the thinnest on the market today
- The advantage of our ultra-thin cable means that they can be tiled straight over if needed
- Our heating systems are constructed using multi-strand wires making them extremely tough
Under Tile & Stone Under-Floor Heating Mats from Living Heat are perfect for all domestic or commercial floor areas. All our 150W electric underfloor heating mats are super easy to fit. The heating element is easy to tile over as the heating cable is only 3mm thick. The mesh backing has a full pressure-sensitive adhesive coating to hold the entire mat firmly in place. For total peace of mind, the underfloor heating is backed up by a lifetime warranty.
The heat mats can be laid directly onto a solid wood or concrete subfloor. It is highly recommended insulation be installed, prior to the underfloor heating to aid efficiency and the response of the heating kit.
Although both our 150w and 200w can usually heat a room and floor on their own, insulation is an integral part of the complete underfloor kit. The thermal boards drastically reduce running costs and the warm-up time of the heating. For new builds, extensions or old problematic floors, we also offer a range of decoupling membranes, preventing possible lateral movement of the floor.
The XPS, Tile backer thermal boards and final floor tiles, should be fixed with a flexible adhesive. We can even supply a two-part specialist self-levelling compound, the choice of the professional, which is used to embed the heating before the flooring is laid. A 3mm depth of self-level or adhesive is required to embed the heating, before Tiling.
Should you have any questions when buying, installing or running our underfloor heating, Living Heat is always here to help and offers a Free technical help service to assist you all the way.
Our heat mats come as a kit with full fitting instructions and can be used as a primary heat source or simply for gently warming up the floor to warm up your feet assuming sufficient heating coverage and insulation is installed.
Included
| PRODUCT COMES WITH |
|---|
| Floor probe (When Ordered with thermostat) |
| Fixing Tape |
| Fitting Instructions |
Things to know about this product
- Advanced High Temperature Teflon Fluoropolymer insulation
- Ultra-thin yet Ultra tough armour braided heating cable
- Easy fit the dual-core heating cable. Only one end of the cable needs to be wired into the thermostat
- Our Fast fit self-adhesive mesh backing. The mat can be rolled out over the floor and held firmly in place without additional tapes or adhesives
Living Heat 150w heating mats are ideal for use as a primary heating source, under tile and stone flooring. When using these heating mats as a primary heat source a minimum of 70% floor coverage is required. The building must have suitable insulation. And any un-insulated subfloors must be insulated with suitable insulation, before fitting the heating mats. This will not only increase the response rate of the heating. But also maintain the high efficiency of all our underfloor heating systems.
All Living Heat mats are made 0.5m wide x your required length. The heating cable can be easily detached from the sticky mesh backing. To allow the cable to be laid loosely in awkward areas, to provide maximum versatility for the installer. At only 3mm in depth the mats are ultra-thin, to minimize floor height build-up. And are suitable for wet and dry areas alike.
Please Note: For larger areas multiple mats may be sent. These mats can be joined together and controlled through one suitable thermostat.
For larger areas multiple mats may be sent. These mats can be joined together and controlled through one suitable thermostat.
TECHNICAL INFORMATION
- 150w Heating System
- Operating Voltage 230/240V 50Hz
- Mat width 0.5m
- 3m long cold / connection tails
- Double insulated & earthed heating element
- Ultra-thin & durable heating element
- Easy and quick to lay with full self-adhesive backing
- Pre-spaced wire attached onto tough fiberglass mesh backing
- Life Time warranty
Living Heat underfloor heating cables have been specifically designed to be used under tiles and natural stone floors. They are all capable of being used as the primary heat source, (No other heating required). A minimum of 70% floor coverage is recommended (@ 150w/m2 or above) for use as a primary heat source but in some instances, a larger area or wattage may be required.
All Living Heat kits are easy to lay and do not increase the floor height. The heating cables are just over 2mm thick so this allows the cable to be easily buried in the tile adhesive.
The heating cables are pre-spaced onto a self-adhesive fibreglass mesh backing. This makes fitting each mat quick and easy. Mats are simply rolled out over a clean subfloor and held in place with the self-adhesive mesh backing. This eliminates the need for additional tapes and adhesives.
Living Heat products have a Technical Free Phone Helpline For any questions or help you may have/require.
It is not recommended to install underfloor heating over an uninsulated subfloor, areas without the addition of a minimum, 6mm insulation layer first being installed, (please see our eBay store for suitable insulations). This is because un-insulated concrete or other subfloor types greatly reduces the response time and overall efficiency of any underfloor heating.
Living Heat offers other underfloor heating options in our eBay shop for almost any room size and floor covering. Please feel free to contact us if you have any specific requirements. Give us a call to discuss your project or our other underfloor heating systems we advertise on eBay. We are here to help.
There is no specialist labour or tools required to lay and fit Living Heat kits. The only qualified person required is an electrician to make the final connection to the mains power.
If you require assistance please do not hesitate to contact us.
Our range of thermostats fit into a standard 1 gang back box. And can carry a maximum load of 16amps. After this threshold is passed a simple contact or relay switch must be installed.
No Thermostat
We would not recommend Underfloor heating without a thermostat and floor probe to control your underfloor heating system.
Option 1
M1 Manual Thermostat
- On/Off Switch
- Temperature Turn Dial
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 2
M5 Manual Thermostat
- 2.6" LCD Screen
- Air and Floor temperature sensors
- Blue LED backlight for easy viewing
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 3
T5 Touchscreen Thermostat
- Touch Control LCD Screen
- Fits standard 1G electrical wall box
- Low profile design
- 1 Year manufacturer's warranty
Option 4
Wi5 Wi-Fi Thermostat
- Touch Buttons
- Alexa & Google Enabled
- Full Wi-Fi Phone Control
- Low brightness backlit for nighttime bedroom use
- Auto / Manual
- 6 Events per day
- Frost protection
- Temperature Override
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 5
CT1000 Wi-FI Colour Touchscreen White Thermostat
- Full WiFi Connectivity
- Easy to use APP
- Full 4.3" Colour Touch Screen
- Colour touch screen
- 6 Timed Events x 7 day programmable cycle
- Adjustable comfort Mode, Economy Mode, Party Mode, Holiday Mode and program Mode control
- Manual override facility
- Air and Floor temperature sensors
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 6
CT1000 Wi-FI Colour Touchscreen Silver Thermostat
- Full WiFi Connectivity
- Easy to use APP
- Full 4.3" Colour Touch Screen
- Colour touch screen
- 6 Timed Events x 7 day programmable cycle
- Adjustable comfort Mode, Economy Mode, Party Mode, Holiday Mode and program Mode control
- Manual override facility
- Air and Floor temperature sensors
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 7
CT1000 Wi-FI Colour Touchscreen Black Thermostat
- Full WiFi Connectivity
- Easy to use APP
- Full 4.3" Colour Touch Screen
- Colour touch screen
- 6 Timed Events x 7 day programmable cycle
- Adjustable comfort Mode, Economy Mode, Party Mode, Holiday Mode and program Mode control
- Manual override facility
- Air and Floor temperature sensors
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 8
Installation and Fitting
To work out what size kit you require please follow the next 3 steps.
Step 1. Measure the total floor area that you wish to be heated. (Less any immovable objects such as bath or kitchen units that you do not want the heating to be fitted under).
Step 2. Take off a 10cm border around the floor area to be heated as the heating elements should not be run up tight against any walls.
Step 3. This measurement should then be rounded down to the nearest 0.5m, (ie 5.27m 2floor size would be rounded down to a 5m 2kit size). The measurement can be rounded down to the nearest 1m on larger room areas.
Fitting Guide
1. Make sure the floor area is level, clean and free of any dust and debris. If laying tiles the floor should be made suitable for laying tiles before the heating or insulation boards (if required)are laid.
2. To fit the heating cable the heated floor area must be first marked out with clear markings at even centres at opposite ends of the room / heated area, (the distance between markings will depend upon the wattage required per sqm and length of cable to be laid). To mark the floor the installer should first work out what wattage per sqm is required and thus what length or wattage cable is required. The floor should then be marked to show the desired spacing between cable runs to achieve the desired wattage per m 2over the floor area.
3. Starting from the closest point to the thermostat/power source run the cable back and forward between the floor markings taping over the cable at the start and end of each run to fix it in place so the tiling process can be completed. If required, the additional tape can be used, or the full length of the cable can be taped over to maintain even spacing and fix the cable in place.
4. Depending upon whether you are using a Living Heat dual or single-core system the other end of the cable may need to be returned to the start position. (Living Heat duel core systems do not require the 2nd end of the cable to be returned to the start point).
Below is a typical underfloor heating floor section build-up of a tiled floor.
