Search
Customer
View
10w Poly Solar Panel Battery Charging Kit Charger Controller Boat Caravan HomeK1
10 YEAR SOLAR PANEL WARRANTY
Why Go Solar?
Beat energy inflation, energy security, remote location power sources (save a fortune on armored cabling), mobile power sources, fast payback periods over conventional fuel sources such as diesel generation and hook-ups, keep batteries fully charged at all time as deep discharge shortens life, environmentally friendly power which reduces carbon emissions to slow global warming and climate change.
Applications
Sheds, Stables, Boats, Caravans, Motorhomes, electric fencing, road/ path/ driveway illuminated signage, campsites, yurts, multi-panel off grid power source for small buildings, remote telecomms, mobile food outlets, and many more...
Independent Off-Grid Solar Power Source
A rough to guide solar panel power output relative to weather conditions:-
100% power output - clear sky midday sun with the panel fully tilted toward the sun's position in the sky.
75-85% output - clear sky midday sun but with the panel laid flat
50% output - thin cloud, or intermittent small clouds
10-20% output - midday overcast sky or rainy conditions
Solar Panel - Technical Specifications
10 Watt (with 1m Cable)
In the event that the solar panel is in shade for a prolonged period, our solar panels either have one or two built-in bypass diodes which will enable the panel to continue generating.
Solar Panel Battery Charge Regulator Controller 12V / 24V Auto Switching
Solar charge controllers are required to regulate the power output from the solar panels to ensure effective charge of a typical 12V or 24V lead acid battery without overload. PWM (Pulse Wave Modulation) solar charge controller provide a cost effective solar charger for the solar panel outputs in our range. Optimised charge control which helps to prolong the life of the battery. 3-6% more effective than non-PWM charge controllers. LED indicator light to show battery state. Uses industrial grade micro-controller chip to work in a wide range of temperatures and humidity.
Warning: The Connection Order Below must be followed
1, Battery Cable, 2 Load Cable, 3, Solar Panel Cable
Do not install the charge controller in a sealed enclosure where battery gases can accumulate.
These charge controllers can be used with one or more 12V batteries where additional storage capacity may be needed.
Solar Panel Battery Charge Regulator Controller 12V / 24V Auto Switching
Solar charge controllers are required to regulate the power output from the solar panels to ensure effective charge of a typical 12V or 24V lead acid battery without overcharging. Charge controllers also help to prevent reverse power discharge from the battery back into the solar panel at night as they act in the same way as a blocking diode. PWM (Pulse Wave Modulation) solar charge controllers provide a cost effective solution to linking your solar panel to the battery. Optimised charge control helps to prolong the life of the battery. The LCD display shows gives and indication of battery charging state and battery voltage. The display also indicates solar power input or power discharge from the battery. Our charge controllers use an industrial grade micro-controller chip to work in a wide range of temperatures and humidity.
Solar Charge Controller - Technical
* Discharge reconnect meaning. This voltage is user adjustable. As the load consumes the power within the battery, the voltage eventually drops to 10.7V and the load output of the controller will automatically stop any further charge from protect the battery. If for example the next day maybe rainy or cloudy day and the battery charges slowly, if the voltage is still below 12.6V, the load output from the controller will still not work. If the sun comes out in the afternoon, or the next day is much sunnier conditions, once the battery voltage rises above 12.6V, the controller load output will automatically start to work again. Discharge reconnect is set to 12.6V by default, although you may wish to set this perhaps 12.4V. Discharge reconnect is aimed at protecting the battery and reducing the depth of discharge cycling. Lead acid batteries last longer with shallow discharge.
Installation
1, make sure your battery has enough voltage for the controller to recognise the battery type before first installation.
2 the battery cable should be as short as possible to minimise loss.
3, this charge controller is only suitable for regulating solar panels. Never connect another charging source to this charge regulator.
Product features
Note:
Do not install the charge controller in a sealed enclosure where battery gases can accumulate.
These charge controllers can be used with one or more 12V batteries where additional storage capacity may be needed, or a combination of series and parallel batteries to make a 24V energy storage system.
Solar Kit Contents Product Warranties Lowenergie Solar Panels have a 10
Year Warranty for materials and workmanship. Power Output Warranty is at least
90% maximum power for first 10 years of use and; Power Output Warranty of at least
80% maximum power output for up to 25 years use. Charge Controller Warranty – 1 Year
One or more solar panels can be connected a battery bank and power inverter using a solar charge controller. You can therefore have a 240v power supply anywhere in the world without grid supply. Please see our solar power kits.
Shipping
We post week days Monday - Friday via the postage option you chose at check out.
Please Note
We try to dispatch the same day however sometimes this is not possible due to our collection times. Some items due to their size or weight may be unavailable to customers in the Highlands or Islands.
Returns
In line with CCR any item can be returned to us within 30 days. We must be notified in writing of the cancellation and refunds can take upto 15 days.
The item must be in a re-sale condition, we will not cover any returns postage.
To comply with all UK building regulations any electrical work should be carried out by a UK certified electrician.
All electricity should be switched off prior to ANY electrical work being carried out.
Low Energy Supermarket accepts no responsibility for any electrical item purchased being installed and any item is fitted at owners risk. Please do not book any qualified tradespersons until goods are in hand.
All our items require immediate payment.
If you are wishing to purchase more than one item, click 'Add to Basket' and then proceed to the next item.
Once you have added all items to the basket, click the 'basket' icon in the top right corner of the page and complete payment.
Low Energy Supermarket is a certified carbon neutral plus company and was founded in 2010. We are a family run business based in Cheshire, UK. We offer various energy saving products which will help to reduce the ever rising energy bills.
We only offer quality products and bring these to you at the most competitive prices we can.
We are always expanding our range so please save us as a favorite seller or sign up to our newsletters to ensure you are one of the first to hear about our new items.
WEEE producer number: WEE/KC4239XX
