|
You are bidding on the following:
*** BRAND NEW***
FLUKE NETWORKS MS2-100 MICROSCANNER2 CABLE VERIFIER TRACER
Model #: MS2-100
Retail: $490
W/ FULL WARRANTY THROUGH FLUKE NETWORKS
Item Details:
| Manufacturer: |
Fluke Netowkrs |
| Description: |
Next-generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface.
- Revolutionary Interface – graphical wiremap, length, cable ID, and distance to fault displayed on one screen
- Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters
- IntelliTone Toning – locates virtually any cable or wire pair with IntelliTone digital and analog toning
- VDV Service Detection – verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
- Rugged Housing – integrated rubber holster enhances grip and makes it durable enough for the toughest jobs
- Oversized Display – large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet
Streamline verification testing
The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.
Rule out service problems fast
Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.
Specifications:
|
|
|
Test Connectors |
Twisted-pair: UTP, FTP, SSTP 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; Coax: F-connector for 75 Ω, 50 Ω, 93 Ω cables |
|
Cable Tests |
Length (460 m or 1500 ft. with resolution to 0.3 m or 1 ft.), wiremap to TIA-568A/B standards, remote ID locators; displays results on one screen |
|
Tone Generator |
IntelliTone digital tone: [500 KHz]; analog tones: [400Hz, 1KHz] |
|
PoE Detection |
Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices |
|
Ethernet Port Test |
Advertised speed of 802.3 Ethernet ports (10/100/1000) |
|
Power Source |
Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD |
|
Dimensions |
3 in x 6.4” x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) |
|
Weight |
0.8 lbs. (363 grams) |
|
Display |
Monochrome liquid crystal display (LCD) with backlight |
|
Calibration |
User-configurable NVP for twisted pair and coax; determines actual NVP with known length of cable |
|
Operating Temperature |
32 °F to 113 °F (0 oC to 45 oC) |
|
Storage Temperature |
-4 °F to +140 °F (-20 oC to +60 oC) |
|
Operating Humidity |
90 % (50 °F to 95 °F; 10 oC to 35 oC) |
|
(%RH without condensing) |
75 % (95 °F to 113 °F; 35 oC to 45 oC) |
| Shock Vibration |
Meets requirements for MIL-PRF-28800F for Class 2 random vibration; 1 m drop test with and without wiremap adapter attached |
| Safety |
EN 61010-1 2nd Edition |
| Altitude |
4000 m; Storage: 12000 m |
| EMC |
EN 61326-1 |
| Agency Certifications |
N10140 C-Tick EMC standard; FCC Part 15 Class A; CE European Union Directives Pollution Degree 2 |
| Warranty |
One year |
Features:
»
Revolutionary Interface
Yesterday’s cable verification testers force users to toggle between up to four different modes of operation to view all test results. This not only slows the test process, but also causes frustration and leads to high user error rates. MicroScanner2 has defeated this convention by displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen. Plus it features an oversized, backlit LCD screen with the power to display wiremap results graphically, which brings unprecedented comfort and clarity to the user experience.
Tired of losing or breaking all the adapters needed for testing the various voice, data, and video media types? MicroScanner2 makes these awkward adapters things of the past with built-in RJ11, RJ45, and coax support. Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATV outlets right out of the box. Just one more way MicroScanner2 streamlines cable verification.
MicroScanner2 features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment. Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets. Digital mode especially performs in environments with high data, RF, or electromagnetic interference. When coupled with the IntelliTone 200 Pro Probe, it can also be used to verify cable wiremap from either the tester end or the probe end.
Use analog mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone. MicroScanner2’s smart analog tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together. This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems.
Voice, data, video technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem. MicroScanner2 acknowledges this, giving technicians high power vision to detect today’s most common service problems. Detect the presence of POTS voltage and verify polarity. Verify powered 10/100/1000 Ethernet switches at the far end. Or, confirm proper PoE voltage and pairs.
With all the abuse you put your tools through, you can’t afford for them to be delicate. MicroScanner2 features a rubber wrap-around holster that makes it the right tool for even the toughest jobs. Toss it into your toolbox. It can handle it. Plus, it now comes standard with a vinyl carry pouch for enhanced protection and convenience.
Included Accessories:
- MicroScanner2 Cable Verifier with main wiremap adapter,
- Multi-language Getting Started Guide
- User CD
- Batteries
- Fluke Networks carry pouch
|
| Condition: |
Brand New |
Auction Details:
| Shipping: |
- All domestic packages will be shipped out via Fedex or UPS within the lower 48 states
- Shipping to Hawaii and Alaska would be extra, and those shipments will be shipped out via USPS priority mail, unless otherwise stated in the auction or negotiated in emails.
- Shipping to APO, RR, or PO box will be handled via USPS and would be extra on certain items, please email us prior bidding.
- Goods will be dispatched the latest in 2 business days.
- Goods will be shipped out after the holidays and weekends.
- No local pick ups accepted at this time, unless otherwise stated in the auction
- Shipping costs are set at that price to cover some of our costs and packaging and handling fees as well as some of the ebay and paypal fees which add to about 8.5% of the total end price. Please don't email us to negotiate about the shipping costs. We are extremely busy, so we might not answer your emails.
- Shipping and handling fees are not negotiable, by bidding on this item the buyer agrees to pay for all the shipping costs, failure to do so will result a non paying bidder.
- We ship to any destination in the world.
- INTERNATIONAL BUYERS: The International shipping rate is flat rate to most destinations in the world, please email us for additional information.
- California buyers are subject to pay 9.25% tax.
- International buyers are responsible for all tax and custom duty charges outside the country.
|
| Payment: |
-
U.S. Buyers: Credit cards through PayPal
-
Please note that we can't accept direct credit card payments at this time
-
International Buyers: PayPal or Wire
-
Payment is due within 14 days of auction closing. If payment is not received within this time unless otherwise stated or negotiated, item will be relisted on eBay. And the buyer would be reported as NON-PAYING bidder. |
| Terms & Conditions: |
- After the auction is closed, auction winners should contact us within 3 days regarding any questions or requests.
- After the auction is closed, payment should be received within 14 days.
- All sales are final
- Any returned non-defective item(s) is subject to 20% restocking fee
- Shipping and handling charges are not returnable
- Items will be replaced or exchanged in case of DOA
- If the same item or similar item is not in stock in case of DOA, the buyer will receive a refund back
- We combine shipping to save customers money, however, there will be an additional charge per item, please read the description for each item to find out about the specific fees.
- All buyers are subject to pay all taxes and duty fees inside and outside of the United States, failure to do so will result a negative feedback and buyers will be reported to ebay.
- Our facilities are closed during the weekends and other holidays and there will be no shipments during these time periods. All packages will go out after the weekend or after the holidays.
|
| Contact Information: |
For any questions regarding this or any of our other auctions please use ebay messaging system. |
|
