IMPORTANT - PLEASE NOTE for International Buyers (Outside European Union)
This product is dispatched from Spain, Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.__________________________________________________________
Alba-Combi Engine Monitoring 15 PGN - Analog to NMEA 2000 Signal Converter with SeatalkNG Kit
Translate analogue signals from all over the boat to an NMEA2000® network
Configuration and setup from PC and without any calibration tools
Monitor all boat parameters anytime anywhere
With AlbaCombi you can monitor engine data, tank levels, alarm status, generic pressure and temperature not only from any multifunction display but also from any smartphone or personal device with an Internet connection.
Customize your monitoring interface
The Alba-Combi has an embedded monitoring web server that will allow to create a full monitoring display with analogue or digital gauges to be displayed in PC, Mac, iOS or Android devices. Whether it’s onboard via WiFi or ashore via an Internet connection, you can see what is happening aboard your vessel.
Powerful
With the AlbaCombi you get twelve 0V to 32V inputs that can be used for anything from reading voltages of batteries to interfacing with any analogue gauges. Six channels can be configured to measure resistance from any industry standard engine sensor. Also there are two RPM inputs, one PTC temperature input, one shunt and two relay outputs.
Precise
All twelve resistance and voltage channels have comprehensive calibration that allow you to create an 8 point calibration table or select a predefined industry standard calibration table for most common sensors and gauges.
Versatile
The AlbaCombi can be used to get engine data, tank levels, generic pressure and temperature from any resistive, voltage or 4-20mA sensor (additional resistor needed)
Specifications
Electrical Specifications:
Power supply: 9-32V DC from the NMEA2000 bus
Consumption: 150mA
Analog Inputs:
6 x Resistive (0 to 600 Ohm) or Voltage (0 to 32V)
6 x Voltage (0 to 32V)
2 x RPM signals or Magnetic Sensor
1 x Temperature PTC1000
1 x Shunt Current 100mV
Data Connectivity:
Ethernet Port (To connect directly to your laptop or computer)
Isolated CAN NMEA2000
PGNs Supported:
PGN 127488 – Engine Parameters, Rapid Update
PGN 127489 – Engine Parameters, Dynamic
PGN 127493 – Transmission Parameters, Dynamic
PGN 127505 – Fluid Level
PGN 127508 – Battery Status
PGN 130314 – Pressure
PGN 130316 – Temperature, Extended Range
PGN 130576 – Trim Tab Status
Mechanical specifications:
Dimensions: 105 x 86 x 59 mm (DIN 43880 size 6). You can download the 3D model here
Weight: 230 gr.
Rail Mount: DIN Rail Clip EN 50.022
Working temperature: -15ºC to +55ºC
Box contents:
1 x Albacombi
1 x Rail Mount
1 x Manual Guide (English)